Reinstall Base Plate; Install Barrier Screen; Install Remote Control Handset Wall Holder - Valor LX2 Series Installation & Owner's Manual

QUALIFIED
INSTALLER

Reinstall Base Plate

1. Place the base plate on the fi replace's front fl ange
with the magnets behind the fi replace's front
panel.
2. Ensuring the plate is lined up with the fl ange, slide
the plate sideways so both its ends butt with the
vertical panels of the black frame.
3. Pull the plate forward so it is fl ush with the
fi replace's front fl ange.
66
INSTALLATION

Install Barrier Screen

FOR SAFETY PURPOSE, ensure the barrier
screen is installed on the fireplace.
Install the barrier screen onto the appliance.
1. Place the side screen on the base plate of the
appliance opening, magnets inboard against plate
fl ange. Push top against top plate fl ange.
2. Place the front screen on the base plate of the
appliance opening, magnets inboard against plate
fl ange. Push top against top plate fl ange.
Note: The front screen frame overlaps the side
screen frame.
3. Ensure that the screens are secure.
Install Remote Control Handset Wall
Holder
The remote control kit for this fi replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall.
To install the holder to the wall, fi nd a convenient
location and use the hardware provided with the kit.
See the diagram below for required hardware and
confi gurations. Note that the holder can be installed at
the base of a light switch plate.
IMPORTANT. The location of the remote control
handset is important to assure proper temperature
regulation. To obtain a constant temperature, we
recommend that the handset should be between 3
and 15 feet away from the appliance but not directly
above it. We also advise that the handset should
be located away from any other heat source and not
in direct sunlight as this may aff ect the temperature
sensor located in the remote handset.
WARNING
!