Overview - Valor LX2 Series Installation & Owner's Manual

WARNING
!
Ensure weight of wall above is
NOT carried by the appliance.
HeatShift front outlet
Framing—See Framing
Considerations
HeatShift Ducts (4)
1/2" thick non-combustible
cement board required
above and on both sides of
fi replace opening–
NOT supplied
Wall Finish above opening g
Combustible wall fi nish up
to 3/4" thick allowed above e
opening overtop of 1/2 2 "
cement board. Combustible e
projections must otherwise e
conform to allowable mante e l
p p p p pr pr oj oj j j j j j ecti tion ec ons— s se see e p pa p p p pa ge g ge g g g 2 2 7. 7 7 7 .
Wall fi nish below opening
Combustible material up to
1-1/4" thick allowed below
opening. Combustible
projections must otherwise
be kept min. 4" below
opening.
Combustible Material Allowed Beneath Fireplace.
When the appliance is installed directly on
carpeting, tile or other combustible material
other than wood fl ooring, the appliance shall be
installed on a metal or wood panel extending the
full width and recessed depth of the appliance.
WARNING
!
Some materials or items, although safe,
may discolor, shrink, warp, crack, peel, and
so on because of the heat produced by the
fi replace. Avoid placing candles, paintings,
photos, and other items sensitive to heat
around the fi replace.

OVERVIEW

Vent collar supplied as 5 x 8" outlet, fi eld convertible to 4 x
6-5/8" outlet (adapter supplied). Note - Vertical rise required in
vent system when adapting to 4 x 6-5/8" venting
HeatShift Plenum (front or sides) or Duct Termination
Plates (top) mandatory! HeatShift system supplied
separately—see instructions packed with kits
HOT WALL SURFACES! The walls directly
above the fi replace are constructed of non-
combustible materials and, although safe, it
may reach temperatures in excess of 175° F
depending on choice of materials. Do not
touch. Finish the walls using materials
suitable for these temperatures.
QUALIFIED
INSTALLER
HeatShift sides outlet
Remote Battery
and Wall Switch Kit
(required) (35-foot
wire length) (supplied)
Remote
Control
Handset
Wall Holder
1/2" thick non-combustible
cement board required
above and on both sides
of fi replace opening–NOT
supplied
2200J heater
WARNING
!
25