Table of Contents
Advertisement
Installation
Decorative Glass Set 2200DGS
Material required
• Decorative Glass set, which contains:
• 4 bags of clear fi reglass
Installation
Carefully unpack the kit.
Carefully spread the fi reglass by hand on the surface
of burner and the media tray covering the edge of the
burner. Do not pour directly from the bag and do not
pour too much to avoid blocking the burner ports.
Use one bag of fi reglass for the burner, one for the rear
media tray and one for the front media tray. Use the
fourth bag to fi ll up gaps or edges of the burner.
NOTE: Ensure the areas within the pilot shield and pilot
safe zone are clear of fi reglass.
Pilot shield
Decorative Glass Set installed
Pilot safe zone
WARNING
CHOKING HAZARD! Ensure that the
fireplace area is clear of fireglass particles
as these could be ingested by small
children. Vacuum area after installation.
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace The use of any
other fi reglass products may void your fi replace war-
ranty.
Fuel Beds
43
Advertisement
Table of Contents
