Table of Contents
Advertisement
Installation Planning
Note
This appliance may ONLY be
installed in an existing unaltered,
functioning solid-fuel burning
fireplace with a working flue and
constructed of non-combustible
material.
This appliance may be installed
in outdoor, weather protected
environments as defined in the
GV60CKO Outdoor Conversion Kit
instruction manual.
DO NOT install into combustible
construction. This appliance is
NOT APPROVED for installation
with a zero clearance kit.
Trim
(sold separately)
780 fi replace
Existing non-combustible
hearth.
Combustible hearth or fl oors
within 16" of insert must be a
minimum 4" (102 mm) below
bottomr of insert. Gas insert
does not require a hearth.
WARNING
HOT HEARTH / FLOOR! The hearth or floor
in front of the fireplace may become very
hot when the fireplace heats. Do not use
the hearth as a seat or shelf. Solid wood
flooring in front of the fireplace (if allowed)
may shrink during the heating season due
to heat.
12
WARNING
Some materials or items, although safe,
may discolor, shrink, warp, crack, peel, and
so on because of the heat produced by the
fireplace. Avoid placing candles, paintings,
photos, and other items sensitive to heat
around the fireplace.
Overview
Chimney Terminal Cap
Flashing
2 x 3" approved Flex Chimney
Liners running full length
Existing unaltered, functioning
solid-fuel-burning fi replace and
chimney
Advertisement
Table of Contents
