Installation Planning
This appliance may ONLY be installed in an existing unaltered, functioning solid-fuel burning fireplace with a
working flue and constructed of non-combustible material.
This appliance may be installed in outdoor, weather protected environments as defined in the GV60CKO
Outdoor Conversion Kit instruction manual.
DO NOT install into combustible construction. This appliance is NOT APPROVED for installation with a zero
clearance kit.
WARNING
Some materials or items, although safe,
may discolor, shrink, warp, crack, peel,
and so on because of the heat produced
by the fireplace. Avoid placing candles,
paintings, photos, and other items
sensitive to heat around the fireplace.
WARNING
HOT HEARTH / FLOOR! The hearth or floor
in front of the fireplace may become very
hot when the fireplace heats. Do not
use the hearth as a seat or shelf. Solid
wood flooring in front of the fireplace (if
allowed) may shrink during the heating
season due to heat.
(depending of front
used, may be included
Front with Barrier Screen
(required, sold separately)
530 insert fireplace
10
Closure plate
or sold separately)
Overview
Approved
Chimney
Terminal Cap
Flashing or
Terminal
Adapter with
Flashing from
590FVK2
2 x 3"
approved flex
chimney liners
running full
length or
5" x 3" co-axial
using 590FVK2
Flex Vent Kit
Existing
unaltered,
functioning
solid-fuel
burning
fireplace &
chimney