Figure 15. Line-Up-And-Match Wiring Access Locations - Eaton IBC-L Installation Manuals

27. Using the retained cabinet mounting bolts, install the floor mounting brackets to the front and rear of the
IBC with the angle facing outward.
28. Secure the cabinet to the floor with customer-supplied hardware.
29. If installing more than one IBC, remove the rectangular knockouts on the bottom front sides the IBCs (see
Figure 15) and repeat Step 1
right or left side of the first IBC.
30. Proceed to paragraph 4.3 Installing IBC Power

Figure 15. Line-Up-and-Match Wiring Access Locations

Left Side View
Eaton 93PM Integrated Battery Cabinet (IBC-L, IBC-LH [432V], and IBC-LH [480V]) Installation Manual 164000228—Rev 08
through Step 28; otherwise, proceed to
Wiring.
Inter-cabinet wiring access
to route interface wiring
between cabinets.
Inter-cabinet wiring access
knockouts. Remove knockouts
as required to route power
wiring between cabinets.
Installation
Step 30. Install additional IBCs on the
Right Side View
37