DX100
Definition of Terms Used Often in This Manual
•
Perform the following inspection procedures prior to conducting
manipulator teaching. Repair any problems that are found
immediately and make sure other necessary processing can be
performed.
– Check for problems in manipulator movement.
– Check for damage to insulation and sheathing of external wires.
•
Always return the programming pendant to the hook on the DX100
cabinet after use.
Damage to the programming pendant can occur if left .in the
manipulator's work area, on the floor, or near fixtures.
•
Read and understand the Explanation of Warning Labels in the
DX100 Instructions before operating the manipulator:
The MOTOMAN is the YASKAWA industrial robot product.
The MOTOMAN usually consists of the manipulator, the controller, the
programming pendant, and supply cables.
In this manual, the equipment is designated as follows:
Equipment
DX100 controller
DX100 programming pendant
Cable between the manipulator and the
controller
v
CAUTION
Manual Designation
DX100
Programming pendant
Manipulator cable
HW0485806
156446-1CD