Editing The Point Variable (Taught Position Data) - YASKAWA DX100 Instructions Manual

DX100

2.2.4 Editing the Point Variable (Taught Position Data)

2 Basic Operations
2.2 Point Variables
The taught position data can be edited by entering a numerical value.
Refer to DX100 OPTIONS INSTRUCTIONS FOR TEACHING POINT
ADJUSTMENT FUNCTION WITH PROGRAMMING PENDANT
(manual No.: HW0485569).
1. In JOB CONTENT display, select {POSITION ADJUSTMENT} from
the pull-down menu of {UTILITY}
– The position adjustment display appears.
2. Select an item to be changed in the position adjustment display
– Selecting the point variable displays the list of point variables. Select
a point variable whose position data is to be corrected.
3. Enter a numerical value, and press [ENTER]
– Enter a value by using the number keys.
4. Select "COMPLETE"
For the details of changing the taught position data, refer to
YASNAC XRC Options Instructions for Teaching Point
SUPPLE
-MENT
Adjustment Function with Programming Pendant .
2-13
156446-1CD
HW0485806