Deleting The Point Variable Designation - YASKAWA DX100 Instructions Manual

DX100

2.2.3.2 Deleting the point variable designation

2 Basic Operations
2.2 Point Variables
2. Press [DELETE] and [ENTER]
• When the deleted point variable is not used for other move
instructions in the same job, it becomes in unused status,
but retains the taught position data. However, the point
NOTE
variables in unused status will be deleted when another
job is selected.
• A move instruction with the point variable that has no
taught position data specified can be also deleted.
1. Move the cursor to the instruction area, and press [SELECT] twice on
the desired move instruction
– The detail edit display of the move instruction appears.
2. Select the point variable (T0010 in the explanation) to be deleted, and
select "UNUSED" of "POS LEVEL," "NWAIT," and "UNTIL"
2-11
156446-1CD
HW0485806