Cisco ASR 9000 Series User Configuration Manual page 313

Implementing Open Flow Agent
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 flow exporter-map fem-name
Example:
RP/0/RSP0/CPU0:router(config)# flow
exporter-map fem
Step 3
destination location
Example:
RP/0/RSP0/CPU0:router(config-fem)#
destination 10.0.1.2
Step 4 version v9
Example:
RP/0/RSP0/CPU0:router(config-fem)#
version v9
Step 5
commit
Example:
RP/0/RSP0/CPU0:router(config-fem-ver)#
commit
Step 6 exit
Example:
RP/0/RSP0/CPU0:router(config-fem-ver)#
exit
Step 7
flow monitor-map map-name
Example:
RP/0/RSP0/CPU0:router(config)# flow
monitor-map mmap
Step 8 record ipv4
Example:
RP/0/RSP0/CPU0:router(config-fmm)# record
ipv4
Step 9
exporter map-name
Example:
RP/0/RSP0/CPU0:router(config-fmm)#
exporter fmap
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Configuring NetFlow for the OpenFlow Agent
Purpose
Enters flow exporter map configuration mode.
Note A single flow monitor map can support up to eight
exporters.
Configures the export destination for the flow exporter map. The
destination location argument can be a hostname or an IP address.
Specifies export version parameters and enters the flow exporter
map version configuration mode.
Commits the configuration changes to running to the running
configuration.
Exits flow exporter map version configuration mode and enters
global configuration mode.
Creates a monitor map and configures a monitor map name and
enters flow monitor map configuration mode
Configures the flow record map name for IPv4. By default, the
originating autonomous system (AS) numbers are collected and
exported.
Associates an exporter map with a monitor map.
A single flow monitor map can support up to eight
Note
exporters.
295