Cisco ASR 9000 Series User Configuration Manual page 222

Verifying the Frequency Synchronization Configuration
Last received QL: Opt-I/PRC
Effective QL:
Output:
Selected source:
Selected source QL: Opt-I/SSU-B
Effective QL:
Next selection points: RP_SYSTEM
Clock interface Sync1 (Down: mode not configured)
SSM supported and enabled
Input:
Down
Last received QL: Opt-I/PRC
Effective QL:
Output:
Selected source:
Selected source QL: Opt-I/SSU-B
Effective QL:
Next selection points: RP_SYSTEM
Clock interface Internal0 (Up)
Assigned as input for selection
Input:
Default QL:
Effective QL: Opt-I/SSU-B, Priority: 255
Next selection points: RP_SYSTEM RP_CLOCK_INTF
Investigates issues within individual interfaces. If the clock interface is down, a reason is displayed. This may be because
there is missing or conflicting platform configuration on the clock interface.
Step 4 show processes fsyncmgr location node-id
Example:
RP/0/RSP0/CPU0:router# show processes fsyncmgr location 0/0/CPU0
Executable path: /pkg/bin/fsyncmgr
Respawn count: 1
Max. spawns per minute: 12
Last started: Mon Mar
Process state: Run
Package state: Normal
Started on config: cfg/gl/freqsync/g/a/enable
startup_path: /pkg/startup/fsyncmgr.startup
Process cpu time: 1730768.741 user, -133848.-361 kernel, 1596920.380 total
--------------------------------------------------------------------------------
Verifies that the fsyncmgr process is running on the appropriate nodes.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
204
Failed, Priority: 100
Internal0 [0/1/CPU0]
Opt-I/SSU-B
Failed, Priority: 100
Internal0 [0/1/CPU0]
Opt-I/SSU-B
Opt-I/SSU-B
Job Id: 134
PID: 30202
Instance #: 1
Version ID: 00.00.0000
Respawn: ON
9 16:30:43 2009
core: MAINMEM
Max. core: 0
Placement: None
Ready: 0.133s
Configuring Frequency Synchronization