Verifying Package Details - Cisco ASR 9000 Series User Configuration Manual

Summary of Package Management
The disk that holds the unpacked software files is also known as the boot device. By default, flash disk0:
Note
is used as the boot device. To use an alternate storage device, such as flash disk1:, see the Router Recovery
with ROM Monitor module of Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Guide.
Remember that all RSPs in a system must use the same boot device. If the boot device on the primary
RSP is flash disk0:, then the standby RSP must also have a flash disk0:.

Verifying Package Details

Before you activate a package on the router, you can verify the type of upgrade that is required for the package
and whether the package requires a router reload or not. Use the show install package pie detail command
in admin mode.
RP/0/RSP0/CPU0:router(admin)# show install package disk0:asr9k-px-4.x.x.04I.CSCuc66088-0.0.4.i
detail
Mon Nov 19 09:44:24.036 UTC
disk0:asr9k-px-4.x.x.04I.CSCuc66088-0.0.4.i
asr9k-px-4.x.x.04I.CSCuc66088 V0.0.4.i[SMU]
[composite package]
[root package, grouped contents]
Vendor : Cisco Systems
Desc
Build
Source : By iox-bld27 in /scratch1/SMU_BLD_WS/ci-431_206626_CSCuc66088_121109102249 for
pie
Card(s): RP, CRS-RP-X86, CRS8-RP-x86, CRS16-RP-x86, ASR9001-RP, RP-STARSCREAM,
NP24-4x10GE,
NP200-5x40GE,
A9K-SIP-500, A9K-SIP-AVSM
Restart information:
Default:
Size Compressed/Uncompressed: 1744KB/1830KB (95%)
Components in package disk0:asr9k-px-4.x.x.04I.CSCuc66088-0.0.4.i, package
asr9k-px-4.x.x.04I.CSCuc66088:
disk0:iosxr-infra-4.x.x.04I.CSCuc66088-0.0.4.i
for pie
NP24-4x10GE,
NP80-8x10GE,
Independent
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
26
iosxr-infra-asr9k-px1-4.x.x.04I.CSCuc66088.pi.pie.
: User specified bundle iosxr-infra-asr9k-px1-4.x.x.04I.CSCuc66088.pi.pie.
: Built on Fri Nov
NP24-40x1GE, NP40-40x1GE, NP40-4x10GE, NP40-8x10GE, NP40-2_20_COMBO, NP80-8x10GE,
NP80-16x10GE, NP200-24x10GE, NP200-36x10GE, NP200-2x100GE, NP200-1x100GE,
NP200-8x10GE, NP200-MOD-SMEM, NP200-MOD-LMEM, ASR9001-LC, A9K-SIP-700,
parallel impacted processes restart
iosxr-infra-4.x.x.04I.CSCuc66088 V0.0.4.i[SMU]
Vendor : Cisco Systems
Desc : IOS-XR Infra Package Definition
Build : Built on Fri Nov
Source : By iox-bld27 in /scratch1/SMU_BLD_WS/ci-431_206626_CSCuc66088_121109102249
Card(s): RP, CRS-RP-X86, CRS8-RP-x86, CRS16-RP-x86, ASR9001-RP, RP-STARSCREAM,
NP24-40x1GE, NP40-40x1GE, NP40-4x10GE, NP40-8x10GE, NP40-2_20_COMBO,
NP80-16x10GE, NP200-24x10GE, NP200-36x10GE, NP200-2x100GE, NP200-1x100GE,
NP200-5x40GE, NP200-8x10GE, NP200-MOD-SMEM, NP200-MOD-LMEM, ASR9001-LC,
A9K-SIP-700, A9K-SIP-500, A9K-SIP-AVSM
Size Compressed/Uncompressed: 1744KB/1830KB (95%)
Components in package disk0:iosxr-infra-4.x.x.04I.CSCuc66088-0.0.4.i,
package iosxr-infra-4.x.x.04I.CSCuc66088:
platforms-spa-chopper V[ci-4x-bugfix/8]
Chopper SPA Code.
iosxr-infra-4.x.x.04I.CSCuc66088-package V[Default]
User specified bundle
9 11:00:11 UTC 2012
9 11:00:10 UTC 2012
This component contains Platform
Upgrading and Managing Cisco IOS XR Software
IOS-XR Infra Package Definition
Manifest information for