Cisco ASR 9000 Series User Configuration Manual page 81

Aggregation services router
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Upgrading and Managing Cisco IOS XR Software
RP/0/RSP0/CPU0:router(admin)# install deactivate disk0:
asr9k-upgrade-p-4.0.0
Fri Jul
Install operation 9 '(admin) install deactivate disk0:asr9k-upgrade-p-4.0.0'started
by user 'lab' via CLI at 05:59:59 UTC
Fri Jul 09 2010.
1% complete: The operation can still be aborted (ctrl-c for options)-
1% complete: The operation can still be aborted (ctrl-c for options)
Info:
1% complete: The operation can still be aborted (ctrl-c for options)
The install operation will continue asynchronously.
RP/0/RSP0/CPU0:router(admin)#
Info:
Info:
Info:
Info:
Info:
Info:
Info:
RP/0/RP1/CPU0:Jul
%INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO :
The currently active software is not committed. If the system reboots then the committed
software will be used.
Use 'install commit' to commit the active software.
Install operation 9 completed successfully at 06:01:45 UTC Fri Jul 09 2010.
RP/0/RSP0/CPU0:router(admin)# install commit
Fri Jul
Install operation 10 '(admin) install commit' started by user 'lab' via CLI at06:01:54 UTC
Fri Jul 09 2010./
20% complete: The operation can no longer be aborted (ctrl-c for options)-
20% complete: The operation can no longer be aborted (ctrl-c for options)\
100% complete: The operation can no longer be aborted (ctrl-c for options)
RP/0/RP1/CPU0:Jul
%INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO :
The currently active software is now the same as the committed software.
Install operation 10 completed successfully at 06:01:57 UTC Fri Jul 09 2010.
RP/0/RSP0/CPU0:router(admin)#
RP/0/RSP0/CPU0:router(admin)#
RP/0/RSP0/CPU0:router(admin)# install remove disk0:
asr9k-upgrade-p-4.0.0
Fri Jul
Install operation 11 '(admin) install remove disk0:asr9k-upgrade-p-4.0.0'started
by user 'lab' via CLI at 06:04:58 UTC
Fri Jul 09 2010./
1% complete: The operation can no longer be aborted (ctrl-c for options)
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
Info:
1% complete: The operation can no longer be aborted (ctrl-c for options)
Info:
Info:
Info:
1% complete: The operation can no longer be aborted (ctrl-c for options)
Proceed with removing these packages? [confirm]|
1% complete: The operation can no longer be aborted (ctrl-c for options)
The install operation will continue asynchronously.
RP/0/RSP0/CPU0:router(admin)#SP/0/SM0/SP:Jul
9 06:05:03.902 : envmon[117]: %PLATFORM-ENVMON-4-ALARM : MINOR_HI alarm
cleared by host__temp__Inlet0
9 05:59:58.082 UTC
Install Method: Parallel Process Restart\
The changes made to software configurations will not be persistent
across system reloads. Use the command '(admin) install commit' to
make changes persistent.
Please verify that the system is consistent following the software
change using the following commands:
show system verify
install verify packages
9 06:01:45.662 : instdir[216]:
9 06:01:53.583 UTC
9 06:01:57.807 : instdir[216]:
9 06:04:57.676 UTC
This operation will remove the following packages:
disk0:asr9k-fpd-4.0.0
disk0:asr9k-doc-4.0.0
disk0:asr9k-k9sec-4.0.0
disk0:asr9k-sbc-4.0.0
disk0:asr9k-diags-4.0.0
disk0:asr9k-mgbl-4.0.0
disk0:asr9k-mcast-4.0.0
disk0:asr9k-mpls-4.0.0
disk0:asr9k-rout-4.0.0
disk0:asr9k-fwdg-4.0.0
disk0:asr9k-lc-4.0.0
disk0:asr9k-admin-4.0.0
disk0:asr9k-upgrade-p-4.0.0-
After this install remove the following install rollback point will
no longer be reachable, as the required packages will not be present:
7\
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Upgrading to Cisco IOS XR Software Release 4.0
63

Advertisement

Table of Contents
loading

Table of Contents