Cisco ASR 9000 Series User Configuration Manual page 57

Upgrading and Managing Cisco IOS XR Software
• Verify that the new package is supported on your system. Some software packages require that other
• Review the release notes for important information related to that release and to help determine the
• Verify that the system is stable and prepared for the software changes.
SUMMARY STEPS
1. admin
2. show diag
3. Update the ROMMON software if necessary.
4. show install active
5. show install pie-info device:package [ brief | detail | verbose ]
6. verify packages
7. exit
8. (Optional) show system verify start
9. (Optional) show system verify [ detail | report ]
10. show clock
DETAILED STEPS
Command or Action
Step 1 admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 2
show diag
Example:
RP/0/RSP0/CPU0:router(admin)#
show diag
Step 3 Update the ROMMON software if
necessary.
Step 4
show install active
Example:
RP/0/RSP0/CPU0:router(admin)#
show install active
packages or package versions be activated, and some packages only support specific cards.
package compatibility with your router configuration.
Purpose
Enters administration EXEC mode.
Displays the ROMMON software version for all cards in the system. Verify that
the correct ROMMON software version is installed before upgrading a
Cisco IOS XR software package.
Note
Updates the ROMMON software. For instructions, see Cisco ASR 9000 Series
Aggregation Services Router ROM Monitor Guide.
Displays the active software on the router for the owner SDR. Use this command
to determine what software should be added, upgraded or downgraded on the
router, and to compare to the active software report after installation operations
are complete.
Note
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Preparing for Software Installation Operations
See Related Topics for information regarding the required ROM Monitor
(ROMMON) software version.
You can also display the active packages for a specific node, and view
results in detailed or summary mode. See the Software Package
Management Commands on the Cisco ASR 9000 Series Router module
of Cisco ASR 9000 Series Aggregation Services Router System
Management Command Reference for more information.
39