Cisco ASR 9000 Series User Configuration Manual page 152

Verifying the Configuration of Configuration Groups
SUMMARY STEPS
1. show running-config group [ group-name ]
2. show running-config
3. show running-config inheritance
4. show running-config interface x/y/z inheritance config-command
DETAILED STEPS
Command or Action
Step 1 show running-config group [ group-name ]
Example:
RP/0/RSP0/CPU0:router# show running-config group
group g-int-ge
interface 'GigabitEthernet.*'
mtu 1000
negotiation auto
!
end-group
Step 2 show running-config
Example:
RP/0/RSP0/CPU0:router# show running-config
group G-INTERFACE-MTU
interface 'POS.*'
mtu 1500
!
end-group
interface POS0/4/1/0
apply-group G-INTERFACE-MTU
!
interface POS0/4/1/1
apply-group G-INTERFACE-MTU
mtu 2000
!
Step 3
show running-config inheritance
Example:
RP/0/RSP0/CPU0:router# show running-config
inheritance
.
.
group G-INTERFACE-MTU
interface 'POS.*'
mtu 1500
!
end-group
.
.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
134
Configuring Flexible Command Line Interface Configuration Groups
Purpose
Displays the contents of a specific or all configured
configuration groups.
Displays the running configuration. Any applied groups
are displayed. There is no indication as to whether these
configuration groups affect the actual configuration or not.
In this example, although the group G-INTERFACE-MTU
is applied to POS0/4/1/1, the configured MTU value is
2000 and not 1500. This happens if the command mtu
2000 is configured directly on the interface. An actual
configuration overrides a configuration group configuration
if they are the same.
Displays the inherited configuration where ever a
configuration group has been applied.