Cisco ASR 9000 Series User Configuration Manual page 331

Configuring Call Home
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 call-home
Example:
RP/0/RSP0/CPU0:router(config)# call-home
RP/0/RSP0/CPU0:router(config-call-home)#
Step 3 contact-email-addr email-address
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
contact-email-addr
user1@cisco.com
Step 4 contract-id contract-id-string
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
contract-id
Contract-identifier
Step 5 customer-id customer-id-string
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
customer-id Customer1
Step 6 phone-number phone-number-string
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
phone-number +405-123-4567
Step 7 street-address street-address
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
street-address "300 E. Tasman Dr.
San Jose, CA 95134"
Step 8 site-id site-id-string
Example:
RP/0/RSP0/CPU0:router(config-call-home)#
site-id SJ-RouterRoom1
Step 9 commit
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Configuring Contact Information
Purpose
Enters call home configuration mode.
Configures the customer email address. Enter up to 200
characters in email address format with no spaces.
(Optional)
Configures the contract ID. Enter up to 64 characters. If you
include spaces, you must enclose the entry in quotes ("").
(Optional)
Configures the customer ID. Enter up to 64 characters. If
you include spaces, you must enclose the entry in quotes ("").
(Optional)
Configures the customer phone number. The number must
begin with a plus (+) prefix, and may contain only dashes (-)
and numbers. Enter up to 16 characters.
(Optional)
Configures the customer street address where RMA
equipment can be shipped. Enter up to 200 characters. If you
include spaces, you must enclose the entry in quotes ("").
(Optional)
Configures the site ID for the system. Enter up to 200
characters. If you include spaces, you must enclose the entry
in quotes ("").
313