Cisco ASR 9000 Series User Configuration Manual page 80

Aggregation services router
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Upgrading to Cisco IOS XR Software Release 4.0
- Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical
Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS XR Software for the Cisco XR Router, Version 4.0.0 Copyright (c) 2010 by Cisco
Systems, Inc.
Jul 09 05:39:21.334 : Install (Node Preparation): Booting with software activated by previous
install
operation,errno=2
RP/0/RP1/CPU0Jul
event : 1
RP/0/RP1/CPU0:Jul
Node 0/2/SP is powered off due to admin power off request ios con0/RP1/CPU0 is now available
Press RETURN to get started.
RP/0/RP1/CPU0:Jul
%INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO :
The currently active software is not committed. If the system reboots then the committed
software will be used.
Use 'install commit' to commit the active software. SYSTEM CONFIGURATION IN PROCESS
The startup configuration for this device is presently loading.
This may take a few minutes. You will be notified upon completion.
Please do not attempt to reconfigure the device until this process is complete.
User Access VerificationUsername: labPassword:
RP/0/RSP0/CPU0:router# admin
Fri Jul
RP/0/RSP0/CPU0:router(admin)# show platform
Fri Jul
---------------------------------------------------------------------------------------
0/2/SP
0/RP1/CPU0
0/SM0/SP
0/SM1/*
RP/0/RP1/CPU0:ios(admin)#
RP/0/RP1/CPU0:Jul
%INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO :
The currently active software is not committed. If the system reboots then the committed
software will be used.
Use 'install commit' to commit the active software.
RP/0/RP1/CPU0:Jul
CONFIGURATION COMPLETED
RP/0/RP1/CPU0:Jul
Interface MgmtEth0/RP1/CPU0/0, changed state to Down
RP/0/RP1/CPU0:Jul
Interface MgmtEth0/RP1/CPU0/0, changed state to Up
RP/0/RSP0/CPU0:router(admin)# show platform
Fri Jul
Node
---------------------------------------------------------------------------------------
0/2/SP
0/RP1/CPU0
0/SM0/SP
0/SM1/*
RP/0/RSP0/CPU0:router(admin)# install commit
Fri Jul
Install operation 8 '(admin) install commit' started by user 'lab' via CLI at
05:59:43 UTC Fri Jul 09 2010./
20% complete: The operation can no longer be aborted (ctrl-c for options)-
20% complete: The operation can no longer be aborted (ctrl-c for options)\
100% complete:
The operation can no longer be aborted (ctrl-c for options)
RP/0/RP1/CPU0:Jul
%INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO :
The currently active software is now the same as the committed software.
Install operation 8 completed successfully at 05:59:46 UTC Fri Jul 09 2010.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
62
9 05:44:45.941: syslogd_helper: [89]: dsc_event_handler: Got SysMgr dSC
9 05:45:11.354 : shelfmgr[306]: %PLATFORM-SHELFMGR-3-POWERDOWN_RESET :
9 05:45:27.453 : instdir[216]:
9 05:45:55.941 UTC
9 05:45:59.805 UTCNode
Config State
MSC(SP)
RP(Active)
FC-40G/S(SP)
UNKNOWN
9 05:46:08.411 : instdir_lr[217]:
9 05:50:40.918 : placed[283]: LR-PLANE-READY DECLARATIONSYSTEM
9 05:50:57.293 : ifmgr[213]: %PKT_INFRA-LINK-3-UPDOWN :
9 05:50:57.313 : ifmgr[213]: %PKT_INFRA-LINK-3-UPDOWN :
9 05:59:36.266 UTC
Type
MSC(SP)
RP(Active)
FC-40G/S(SP)
UNKNOWN
9 05:59:41.851 UTC
9 05:59:46.402 : instdir[216]:
Upgrading and Managing Cisco IOS XR Software
Type
N/A
UNPOWERED
N/A
IOS XR RUN
N/A
MBI-RUNNING
N/A
PRESENT
PLIM
State
N/A
UNPOWERED
N/A
IOS XR RUN
N/A
IOS XR RUN
N/A
PRESENT
PLIM
State
NPWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
Config State
NPWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON

Advertisement

Table of Contents
loading

Table of Contents