Cisco ASR 9000 Series User Configuration Manual page 71

Upgrading and Managing Cisco IOS XR Software
Command or Action
Step 9
install verify packages
Example:
RP/0/RSP0/CPU0:router(admin)# install verify
packages
Step 10 exit
Example:
RP/0/RSP0/CPU0:router(admin)# exit
Step 11
show system verify start
Example:
RP/0/RSP0/CPU0:router# show system verify start
Step 12 admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 13 install commit
Example:
RP/0/RSP0/CPU0:router# dir disk1:
RP/0/RSP0/CPU0:router(admin)# install commit
Step 14 Upgrade the field-programmable device (FPD) software, if
necessary.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Purpose
(Optional)
Verifies the consistency of a installed software set with the
package file from which it originated. This command can be
used as a debugging tool to verify the validity of the files that
constitute the packages, to determine whether there are any
corrupted files. This command also checks for corruptions of
installation state files and MBI image files. This command is
particularly useful when issued after the activation of a package
or upgrading the Cisco IOS XR software to a major release.
The install verify packages command can take up to
Note
two minutes for each package to process.
(Optional)
Exits administration EXEC mode and returns to EXEC mode.
(Optional)
Starts the system status check.
Enters administration EXEC mode.
(Optional)
Commits the current set of packages on the router so that these
packages are used if the router is restarted.
For more information, see the Related Topics section.
Whenever a Cisco IOS XR software image that supports SPAs
and SIPs is released, a companion SPA or SIP FPD image is
bundled with the Cisco IOS XR software release. Generally,
the FPD image is not automatically upgraded. You must
manually upgrade the FPD image running on the SPA or SIP
when you upgrade the Cisco IOS XR software image. FPD
versions must be compatible with the Cisco IOS XR software
that is running on the router.
If you have enabled the fpd auto-upgrade command
Note
and add and activate the FPD PIE together with the
software installation PIE, the FPD image is
automatically upgraded before the router is rebooted.
Adding and Activating Packages
53