Cisco ASR 9000 Series User Configuration Manual page 354

Building a Track Based on a List of Objects - Threshold Percentage
SUMMARY STEPS
1. configure
2. track track-name
3. type list threshold percentage
4. object object-name
5. threshold percentage up percentage down percentage
6. Use one of the following commands:
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
track track-name
Example:
RP/0/RSP0/CPU0:router(config)# track track1
Step 3 type list threshold percentage
Example:
RP/0/RSP0/CPU0:router(config-track-list)# type list
threshold percentage
Step 4 object object-name
Example:
RP/0/RSP0/CPU0:router(config-track-list-threshold)#
object 1
RP/0/RSP0/CPU0:router(config-track-list-threshold)#
object 2
RP/0/RSP0/CPU0:router(config-track-list-threshold)#
object 3
RP/0/RSP0/CPU0:router(config-track-list-threshold)#
object 4
Step 5 threshold percentage up percentage down percentage
Example:
RP/0/RSP0/CPU0:router(config-track-list-threshold)#
threshold
percentage up 50 down 33
Step 6 Use one of the following commands:
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
336
• end
• commit
Purpose
Enters track configuration mode.
• track-name—Specifies a name for the object to be
tracked.
Configures a track of type threshold percentage list.
Configures object 1, object 2, object 3 and object 4 as
members of track type track1.
Configures the percentage of objects that need to be UP or
DOWN for the list to be considered UP or Down
respectively.
For example, if object 1, object 2, and object 3 are in the
UP state and object 4 is in the DOWN state, the list is
considered to be in the UP state.
Saves configuration changes.
Implementing Object Tracking