Expanding and assigning parameters to the device
6.5 Expansion cards
Note about long PCIe expansion cards
In the case of long PCI/PCIe expansion cards, connections on the motherboard can become
hidden.
Note on PCI Express expansion cards
An expansion card or graphics card can occupy two slots in each case.
See also
Dimension drawing of the expansion cards (Page 106)
6.5.2
Removing and installing expansion cards
Requirement
● Tx10 screwdriver
Procedure
Installation
1. Remove the screw
2. Insert the expansion card into the
3. Secure the expansion card with the
Removal
Proceed in the reverse order for the removal. In step 2, unlock the expansion card in the slot
before removing it.
62
③
at the
relevant slot and take out the
associated slot bracket, similar to
the figure.
slot in the arrow direction.
Slide the expansion card into the
slot as far as it will go without tilting
the card.
corresponding screw.
Operating Instructions, 09/2018, A5E45118479-AA
SIMATIC IPC1047