Exposure Mode; Image Output Timing; Vertical Timing - JAI GO-5101M-PMCL User Manual

Exposure Mode

The following exposure modes are available on the camera.
Exposure Mode
Off
Timed
Trigger Width
 The settings for exposure control and triggers are related to each other. Be sure to configure the settings
described in "Configuring Exposure and External Trigger Settings" (page 17).

Image Output Timing

■ Vertical timing

Tap
PixelClock
Geometry
[MHz]
1X2-1Y 37.125
(Full)
74.25
84.85
1X3-1Y 37.125
(Full)
74.25
1X4-1Y 37.125
(Full)
74.25
Exposure control is not performed (free-running operation).
Mode in which control is performed using exposure time. Acquire images using an
exposure time configured beforehand on an external trigger.
Mode in which control of the exposure time is performed using the pulse width of the
trigger input signal. The exposure time will be the same as the pulse width of the
trigger input signal. This allows long exposure.
CL H FVAL
Frequency BlankingLine
(KHz)
30.036
60.073
68.433
44.946
74.548
59.879
74.548
Description
FVALValid
Line [B] FrameLine [C]
[A]
34 2056
34 2056
34 2056
34 2056
34 2056
34 2056
34 2056
— 29 —
GO-5101M-PMCL / GO-5101C-PMCL
Total Total Frame
Period (msec)
2090 69.6
2090 34.8
2090 30.5
2090 46.5
2090 28.0
2090 34.9
2090 28.0
Frame Rate
(Hz)
14.37
28.74
32.74
21.51
35.67
28.65
35.67