1X4-1Y; Cable Length Reference; Acquisition Control (Image Acquisition Controls); Changing The Frame Rate - JAI GO-5101M-PMCL User Manual

■ 1X4-1Y

1X4-1Y is a 4-tap output format as defined in GenICam tap geometry.
3
4

■ Cable length reference

The following is a reference for the length of cable you can use based on the Camera Link clock*
CL Pixel Clock [MHz]
37.125
74.25
84.85
*1 The length of cable you can use will also vary depending on type and maker.

Acquisition Control (Image Acquisition Controls)

Perform operations and configure settings related to image capture in [Acquisition Control].
On the GO-5101-PMCL, acquisition control always operates in [Continuous] mode.

Changing the Frame Rate

When [Trigger Mode] is disabled, you can change the frame rate in [Acquisition Frame Rate].
Note
• The shortest frame period varies depending on the ROI, pixel format, and binning mode selected. The longest
frame period is 0.125 Hz (8 sec.).
• When [Trigger Mode] is enabled, the [Acquisition Frame Rate] setting is disabled.
CL cable length
10 m
7 m
3 m
— 27 —
GO-5101M-PMCL / GO-5101C-PMCL
1
.