Exposure Mode; Trigger Control - JAI GO-5101M-PGE User Manual

5.1m digital progressive scan monochrome and color camera
Hide thumbs Also See for GO-5101M-PGE:
Table of Contents

Advertisement

Pixel Format
8-bit
10-/12-bit
*
1
10-/12-bit packed
*
1
*1) 12-bit binning is not supported.
Caution
Although the maximum frame rate value is determined by the GigE bandwidth range, when ROI is
configured, the frame rate cannot exceed the sensor output's allowable frame rate value.

Exposure Mode

The following exposure modes are available on the camera.
Exposure Mode
Off
Timed
Trigger Width
™ The settings for exposure control and triggers are related to each other. Be sure to configure the settings
described in "Configuring Exposure and External Trigger Settings" (page 17).

Trigger Control

The camera allows the following controls to be performed via external trigger signals.
Trigger Selector
Frame Start
Acquisition Start
Acquisition End
Acquisition Transfer Start
™ The settings for exposure control and triggers are related to each other. Be sure to configure the settings
described in "Configuring Exposure and External Trigger Settings" (page 17).
Binning settings
Output area
Height
B.V&B.H 1
2056
BV 2/BH 1 (Mono)
1028
BV 1/BH 2 (Mono)
2056
B.V & B.H 2 (Mono)
1028
B.V&B.H 1
2056
BV 2/BH 1 (Mono)
1028
BV 1/BH 2 (Mono)
2056
B.V & B.H 2 (Mono)
1028
B.V&B.H 1
2056
BV 2/BH 1 (Mono)
1028
BV 1/BH 2 (Mono)
2056
B.V & B.H 2 (Mono)
1028
Exposure control is not performed (free-running operation).
Mode in which control is performed using exposure time. Acquire images using an
exposure time configured beforehand on an external trigger.
Mode in which control of the exposure time is performed using the pulse width of the
trigger input signal. The exposure time will be the same as the pulse width of the
trigger input signal. This allows long exposure.
Start exposure in response to the external trigger signal input. Select this to perform
exposure control using external triggers.
Start image acquisition in response to the external trigger signal input.
Stop image acquisition in response to the external trigger signal input.
Output acquired images at a specified timing in response to an external trigger
signal input. (Up to 7 frames for 8-bit, and up to 3 frames for 10-/12-bit.)
— 28 —
H period
Width
2464
2464
13.414 µs
1232
1232
2464
2464
26.343 µs
1232
1232
2464
2464
26.343 µs
1232
1232
* The values during [Continuous]
Description
Description
GO-5101M-PGE / GO-5101C-PGE
Pack value
Frame rate (fps)
22.7
45.4
8
35.6
69.8
11.3
18.1
16
35.6
35.5
15.1
30.2
12
18.1
35.5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Go-5101c-pge

Table of Contents