Exposure Mode; Trigger Control - JAI SW-4000T-10GE User Manual

SW-4000T-10GE | SW-4000T-SFP | User Manual (2.0)

Exposure Mode

Related Setting Items:
The following operation modes are available on the camera.
Exposure Mode

Trigger Control

Related Setting Items:
In this camera, the following control is performed by the external trigger signal.
Trigger
Selector
Acquisition
Imaging of one frame is started by input of external trigger signal.
Start
Acquisition
Start image acquisition in response to the external trigger signal input.
End
Frame Start Stop image acquisition in response to the external trigger signal input.
Output acquired images at a specified timing in response to an external trigger signal input.
There is a limit to the number of image frames that can be stored internally. The limits for
Frame
each image format are as follows. Acquired images must be output to avoid exceeding
Transfer
these limits.
Start
Example : (PixelFormat RGB8, Width 4096, Height 4096) It is possible to hold 4 frames of
images.
Line Start Imaging of one line is started by input of external trigger signal.
AcquisitionControl
Operation Mode
OFF
Timed
TriggerWidth
AcquisitionControl
Description
- 34 -
Main Functions
Trigger Mode
OFF
ON
OFF
ON
ON