Settings List; Feature Properties - JAI GO-5101M-PMCL User Manual

Settings List

Feature Properties

Item
a) Device Control
Device Vendor Name
Device Model Name
Device Manufacturer Info
Device Version
Device Firmware Version
Device Serial Number
Device User ID
Device Temperature Selector
Device Temperature (C)
Device Reset
b) Image Format Control
Sensor Width
Sensor Height
Sensor Digitization Taps
Width Max
Height Max
Width
Height
Offset X
Offset Y
Binning Horizontal Mode
(GO-5101M-PMCL only)
Binning Horizontal
(GO-5101M-PMCL only)
Binning Vertical Mode
(GO-5101M-PMCL only)
Binning Vertical
(GO-5101M-PMCL only)
Setting range
— "JAI Ltd., Japan"
— GO-5101M-
PMCL
GO-5101C-
PMCL
— See the
possibilities
— —
— —
— —
Any —
Mainboard Mainboard
— —
— —
2464 2464
2056 2056
12 Bit 12 Bit
2464 2464
2056 2056
Binning Horizontal 1: 2464
96 to 2464
Binning Horizontal 2:
96 to 1232
GO-5101M-PMCL: 2056
Binning Vertical 1:
2 to 2056
Binning Vertical 2:
2 to 1028
GO-5101C-PMCL: 2 to 2056
Binning Horizontal 1: 0
0 to 2448
Binning Horizontal 2:
0 to 1224
GO-5101M-PMCL: 0
Binning Vertical 1:
0 to 2054
Binning Vertical 2:
0 to 1027
GO-5101C-PMCL:
0 to 2054
Sum, Sum
Average
1, 2 1
Sum Sum
1, 2 1
— 46 —
GO-5101M-PMCL / GO-5101C-PMCL
Default value
Display/configure information related to
the device.
Display the manufacturer name.
Display the model name.
Display the manufacturer information.
Display the hardware version.
Display the firmware version.
Display the device ID.
Set the user ID for the camera.
Select the area of the camera's interior for
which to display the temperature sensor's
reading.
Display the internal temperature (°C) of
the camera.
Reset the device.
Configure image format settings.
Display the maximum image width.
Display the maximum image height.
Displays the pixel depth output from the
sensor.
Display the maximum image width.
Display the maximum image height.
Set the image width.
Set the image height.
Set the horizontal offset.
Set the vertical offset.
Set the addition process to be used
during horizontal binning.
Set the number of pixels in the horizontal
direction for which to perform binning.
Display the addition process to be used
during vertical binning.
Set the number of pixels in the vertical
direction for which to perform binning.
Description