Table of Contents
Advertisement
■ To use the shading correction function
Configure the settings as follows.
Item
Shading Correction Mode
Shading Mode
Display a white chart under a uniform light, and execute [Perform Shading Calibration].
Note
After shading correction is executed, the shading correction value is automatically saved to the user area selected
in [Shading Mode].
Binning Function
The binning function allows you to combine the signal values of adjacent pixels in the vertical or
horizontal direction (1 x 2 or 2 x 1), or in both directions simultaneously (2 x 2 binning).
Applying binning to a specific field of view results in greater pixel sensitivity with reduced resolution in
the direction(s) that binning has been applied.
The GO-5101 performs vertical binning on the sensor, reducing the total number of lines that must be
read out, thereby resulting in a faster frame rate.
ROI ( Regional Scanning Function)
The ROI (region of interest) function allows you to output images by specifying the areas to scan.
ROI Settings
Specify the area to scan by specifying width, height, and horizontal/vertical offset values under [Image
Format Control].
For details on how to configure the settings, see "Configuring the Output Format" (page 16).
You can increase the frame rate by specifying a lower height, as the number of lines scanned
decreases.
The minimum area is as follows.
GO-5101M-PMCL
GO-5101C-PMCL
Setting value
GO-5101M-PMCL:
Flat Shading (fixed)
GO-5101C-PMCL:
Flat Shading, Color Shading
User 1, User 2, User 3, Off
Width (pixels)
96
96
— 38 —
GO-5101M-PMCL / GO-5101C-PMCL
Description
Select the shading correction mode.
Select the user area to which to save the
shading correction value.
Height (pixels)
2
2
Advertisement
Table of Contents
