Configuring Exposure And External Trigger Settings - JAI GO-5101M-PMCL User Manual

Example: When changing [Pixel Format]
Note
Direct entry of numerical and text values is possible for some setting items.

Configuring Exposure and External Trigger Settings

Configure settings related to exposure control methods and trigger control.
The factory settings are as follows. Change settings as necessary, according to the intended purpose
or application.
Factory default values
Trigger Selector (trigger operation)
Trigger Mode
Trigger Source (trigger signal source)
Trigger Activation (trigger polarity)
Exposure Mode
Exposure Time
Exposure Auto*
* This item is only enabled when [Exposure Mode] is set to [Timed].
Caution
When [Exposure Mode] is set to [Off], [Trigger Mode] cannot be set to [On]. Other settings may also be restricted
depending on the exposure mode, so be sure to set the exposure mode before configuring the trigger settings.
Configure the settings by expanding [Acquisition Control] and configuring the following items.
Item
— 17 —
Default value
Frame Start
Off
Line7-CC1
Rising Edge (rising edge of input signal)
Timed (control via exposure time)
27847 (µs)
Off
GO-5101M-PMCL / GO-5101C-PMCL