JAI GOX-2402M-USB User Manual
  1. Manuals
  2. Brands
  3. JAI Manuals
  4. Digital Camera
  5. GOX-2402M-USB
  6. User manual

JAI GOX-2402M-USB User Manual

Cmos digital progressive scan monochrome and color camera
Hide thumbs Also See for GOX-2402M-USB:
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing this product.
Be sure to read this manual before use.
This manual includes important safety precautions and instructions on how to operate the unit. Be sure to read
this manual to ensure proper operation.
The contents of this manual are subject to change without notice for the purpose of improvement.
© 2021 - 2022 JAI
User Manual
GOX-2402M-USB / GOX-2402C-USB
GOX-3200M-USB / GOX-3200C-USB
GOX-3201M-USB / GOX-3201C-USB
GOX-5102M-USB / GOX-5102C-USB
GOX-5103M-USB / GOX-5103C-USB
GOX-8901M-USB / GOX-8901C-USB
GOX-12401M-USB / GOX-12401C-USB
CMOS Digital Progressive Scan
Monochrome and Color Camera
Document Version: 1.2
GO-X_Series_USB_Ver.1.2_June.2022

Advertisement

Table of Contents
loading

Related Manuals for JAI GOX-2402M-USB

Summary of Contents for JAI GOX-2402M-USB

  • Page 1 This manual includes important safety precautions and instructions on how to operate the unit. Be sure to read this manual to ensure proper operation. The contents of this manual are subject to change without notice for the purpose of improvement. © 2021 - 2022 JAI...

  • Page 2: Table Of Contents

    Go-X Series USB3 Vision I/F Contents Notice/Warranty/Certifications Blemish Compensation Usage Precautions Shading Correction Features Binning Function Parts Identifications Decimation mode ROI Function (Single ROI) Preparation ROI Function (Multi ROI) Preparation Process Pulse Generator Step 1: Installing the Software Sequencer Function Step 2: Connecting Devices Counter And Timer Control Function Step 3: Verifying Camera Operation...

  • Page 3: Notice/Warranty/Certifications

    The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for damages resulting from the use of the information contained herein.
  • Page 4 Go-X Series USB3 Vision I/F Supplement The following statement is related to the regulation on “Measures for the Administration of the control of Pollution by Electronic Information Products“ , known as “China RoHS“. The table shows contained Hazardous Substances in this camera. mark shows that the environment-friendly use period of contained Hazardous Substances is 15 years.
  • Page 5 Go-X Series USB3 Vision I/F Supplement The following statement is related to the regulation on “Measures for the Administration of the control of Pollution by Electronic Information Products“ , known as “China RoHS“. The table shows contained Hazardous Substances in this camera. mark shows that the environment-friendly use period of contained Hazardous Substances is 15 years.

  • Page 6: Usage Precautions

    Go-X Series USB3 Vision I/F Usage Precautions Notes on cable configurations The presence of lighting equipment and television receivers nearby may result in video noise. In such cases, change the cable configurations or placement. Notes on attaching the lens Avoiding dust particles When attaching the lens to the camera, stray dust and other particles may adhere to the sensor surface and rear surface of the lens.

  • Page 7: Features

    Monochrome models : Mono8, Mono10, Mono10p, Mono12, Mono12p Color models : BayerRG8, BayerRG10, BayerRG10p, BayerRG12, BayerRG12p • Gamma correction circuit that uses lookup tables • Internal test signal for settings configuration • Compatible with free eBUS SDK for JAI Connection example: Camera AC adapter External Trigger USB 3.0...

  • Page 8: Parts Identifications

    Go-X Series USB3 Vision I/F Parts Identification ② ③ ④ ① ⑤ ⑥ ⑦ ① Lens mount（C-mount） Mount a C-mount lens, microscope adapter, etc. here. ❖ Before mounting a lens, be sure to refer to “Step 2:Connecting Devices” and confirm the precautions for attaching a lens and the supported lens types.
  • Page 9 Go-X Series USB3 Vision I/F ③ POWER/TRIG LED Indicates the power and trigger input status. LED status and camera status Light Status POWER/ （Lit amber） Camera initializing. TRIG LED （Lit green） Camera in operation. （Blinking green） During operation in trigger mode, trigger signals are being input.
  • Page 10 Go-X Series USB3 Vision I/F ■ Recommended external input circuit diagram (reference example) Opto In + (Pin2) Opto In - (Pin3) ■ Recommended external output circuit diagram (reference example) Opto Out + (Pin4) Opto Out - (Pin5) OPTO-In circuit characteristics Technical notes —...
  • Page 11 Go-X Series USB3 Vision I/F Characteristics of the recommended circuits for Opto OUT OUTPUT LINE RESPONSE TIME Camera Output Signal Output Line Voltage For the operating conditions of applied voltage (User Power) +12V, load resistance 10kΩ, and cable length 1m, the timing is shown in the table below. Item Result (Typ) (μs)

  • Page 12: Preparation

    When using the camera for the first time, install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer. ❖ When you install eBUS SDK for JAI, eBUS SDK for JAI player will also be installed. Download the eBUS SDK for JAI from the JAI website.

  • Page 13: Step 2: Connecting Devices

    9 mm or less Lens mount protrusion Lens ・To prevent vignetting and to obtain the optimal resolution, use a lens that will cover the image sensor size. Model name Image Sensor GOX-2402M-USB Mono 1/2.3 inch 6.62mm x 4.14mm (7.81mm diagonal) GOX-2402C-USB Color GOX-3200M-USB...
  • Page 14 Go-X Series USB3 Vision I/F Note The following formula can be used to estimate the focal length. Focal length ＝ WD /（1 ＋ W/w） WD ：Working distance （distance between lens and object） ：Width of object ：Width of sensor ② Direct connection（or MP-43 tripod adapter plate） When mounting the camera directly to a wall or other device, use screws that match the camera locking screw holes on the camera (M3, depth: 3 mm).

  • Page 15: Step 3: Verifying Camera Operation

    Verifying the Connection between the Camera and PC Verify whether the camera is properly recognized via Control Tool. Connecting the Camera to Control Tool Startup eBUS Player for JAI eBUS Player for JAI eBUS Player for JAI startup screen appears. — 15 —...
  • Page 16 Go-X Series USB3 Vision I/F eBUS Player for JAI File Tools Help Connection Disconnect Select / Connect IP address MAC address GUID Vendor Model Name Acquisition Control Source Mode Play Stop Parameters and Controls Communication control Device control Image stream control Select the camera you want to configure.
  • Page 17 Go-X Series USB3 Vision I/F Check that the settings of the selected camera are displayed. eBUS Player for JAI File Tools Help Connection Disconnect Select / Connect IP address MAC address GUID XXXXXXXXXXX Vendor JAI Corporation GOX-3201C-USB Model JAI_DEMO Name...

  • Page 18: Step 5: Changing The Camera Settings

    * You can specify the image acquisition area. For details, see “ROI (Regional Scanning Function)”. Configuring the [Width] of［ImageFormatControl］ By selecting the item of [Width], you can change the value as shown below. × Device Control Visibility Beginner DeviceControl DeviceVendorName JAI Corporation DeviceModelName GOX-3201C-USB DeviceManufactureInfo See the possibilities DeviceVersion XXXXX DeviceFirmwareVersion XXXXX...

  • Page 19: Step 6: Adjusting The Image Quality

    Display the camera image and adjust the image quality. Displaying the Image Display the image captured by the camera. When you push [Play] button, the camera image appears in right area. eBUS Player for JAI File Tools Help Connection Disconnect...
  • Page 20 Go-X Series USB3 Vision I/F Adjusting the Gain Adjust the image quality using the gain and white balance* functions. *) Color model only To adjust the image quality The Visibility must be changed from [Beginner] to [Guru]. Adjust the sensitivity via the analog gain (i.e., master gain). For details on gain control, see “Gain Control”...

  • Page 21: Step 7: Saving The Settings

    *) Color model only Step 7: Saving the Settings The setting values configured in the player (eBUS SDK for JAI) will be deleted when the camera is turned off. By saving current setting values to user memory, you can load and recall them whenever necessary.
  • Page 22 Go-X Series USB3 Vision I/F Select [UserSetSave], and click [Execute ‘UserSetSave’ Command]. The current setting values are saved as user settings. ■ To load user settings Stop image acquisition. User settings can only be loaded when image capture on the camera is stopped. Select the settings to load (UserSet1 to UserSet3) in [UserSetSelector].

  • Page 23: Main Functions

    Go-X Series USB3 Vision I/F Main Functions Acquisition Control This camera has three Acquisition modes (SingleFrame, MultFrame, Continuous). Use [AcquisitionControl] settings to perform operations and settings for image capture. SingleFrame When the [AcquisitionStart] command is executed, one frame of image is captured. Acquisition Acquisition Start...

  • Page 24: Exposure Mode

    13.7 μs, use 14.7 μs - 13.7 μs = 1 μs as the high or low time for the trigger signal. Model name Image sensor's offset GOX-2402M-USB GOX-2402C-USB The offset time varies depending GOX-3200M-USB on the model as shown in the table GOX-3200C-USB on the left.
  • Page 25 Go-X Series USB3 Vision I/F RCT mode RCT mode can be used when [Exposure Mode] is Timed and [Frame Start Trigger] is enabled. In RCT mode, the image is not output from the camera until FrameStartTrigger is input, but internally the imaging operation is continued and the automatic gain control (AGC) function and the automatic shutter control (ASC) function can be continued.

  • Page 26: Trigger Control

    Go-X Series USB3 Vision I/F Trigger Control The camera allows the following controls to be performed via external trigger signals. TriggerSelector Description AcquisitionStart Start image acquisition in response to the external trigger signal input. AcquisitionEnd Stop image acquisition in response to the external trigger signal input. FrameStart Start exposure in response to the external trigger signal input.

  • Page 27: Pixel Format

    Go-X Series USB3 Vision I/F Pixel Format Selectable PixelFormat is as follows. Color model : BayerRG8, BayerRG10, BayerRG10p, BayerRG12, BayerRG12p Monochrome model : Mono8, Mono10, Mono10p, Mono12, Mono12p Note In color model, the Bayer array is changed by the image flip function. ReverseX : 0 (False) ReverseY : 0 (False) ->...

  • Page 28: Gpio (Digital Input/Output Settings)

    Go-X Series USB3 Vision I/F GPIO (Digital Input/Output Settings) The unit can input/output the following signals to and from external input/output connectors. External output Line2 : Opt Out DC IN / TRIG IN connector (6-pin round) External input Line5 : Opt In DC IN / TRIG IN connector (6-pin round) These signals can be used as triggers and other necessary signals within the camera or as signals output from the camera to the system, such as those used for lighting...

  • Page 29: Videoprocessbypassmode

    Go-X Series USB3 Vision I/F VideoProcessBypassMode The video process bypass mode is a function that bypasses internal video processing on the camera. When bypass is enabled, the sensor output and camera output data can be set to the same bit depth. 12-bit outputs can only be performed in bypass mode.

  • Page 30: Calculate The Maximum Frame Rate

    Mono8/Bayer8 Bayer10/12/10p/12p Model name HMAX InvalidLine HMAX InvalidLine GOX-2402MC-USB GOX-3200MC-USB GOX-3201MC-USB GOX-5102MC-USB GOX-5103MC-USB 1041 1041 GOX-8901MC-USB 1041 1041 GOX-12401MC-USB *) In GOX-2402M-USB, When the pixel format is Mono8 or Bayer8, HMAX = 290 and InvalidLine = 40. — 30 —...
  • Page 31 GOX-3201MC-USB GOX-5102MC-USB GOX-5103MC-USB GOX-8901MC-USB GOX-12401MC-USB *) In GOX-2402M-USB, When using Binning(2x2) and PixelFormat is Mono8 or Bayer8, Non-ExposurePeriod[H] = 16. ・When ExposureTime ≦ MaxOverlapTime_TrOlrd FR_TrOlrd[Hz] = FR_Cont (Same as during Continuous operation) ・When ExposureTime > MaxOverlapTime_TrOlrd Non-OverlapExposureTime_TrOlrd = ExposureTime - MaxOverlapTime_TrOlrd FR_TrOlrd[Hz] = 1000000/{ (1000000/FR_Cont) + Non-OverlapExposureTime_TrOlrd } —...

  • Page 32: Timing Chart

    Go-X Series USB3 Vision I/F Timing chart ■ When [ExposureMode] is [Timed] • FrameStartTrigger On A (Frame Period) Next trigger Input enabled Next trigger disabled Trigger Sensor Exposure Exposure Exposure time Active Readout GOX-2402MC-USB Period From Trigger start edge to PixelFormat Frame Period [A] (usec) Exposure start [B] (usec)
  • Page 33 Go-X Series USB3 Vision I/F GOX-3200MC-USB Period From Trigger start edge to PixelFormat Frame Period [A] (usec) Exposure start [B] (usec) Binning Off Mono8 8396 16.4 Mono10/Mono12 16807 Mono10p 10493 Mono12p 12595 Bayer8 8396 16.4 Bayer10/Bayer12 16807 Bayer10p 10493 Bayer12p 12595 Horizontal Binning On Mono8...
  • Page 34 Go-X Series USB3 Vision I/F GOX-5102MC-USB Period From Trigger start edge to PixelFormat Frame Period [A] (usec) Exposure start [B] (usec) Binning Off Mono8 13387 18.8 Mono10/Mono12 26810 Mono10p 16723 Mono12p 20081 Bayer8 13387 18.8 Bayer10/Bayer12 26810 Bayer10p 16723 Bayer12p 20081 Horizontal Binning On Mono8...
  • Page 35 Go-X Series USB3 Vision I/F GOX-8901MC-USB Period From Trigger start edge to PixelFormat Frame Period [A] (usec) Exposure start [B] (usec) Binning Off Mono8 30864 43.1 Mono10/Mono12 47394 43.1 Mono10p 30864 43.1 Mono12p 35461 43.1 Bayer8 30864 43.1 Bayer10/Bayer12 47394 43.1 Bayer10p 30864...
  • Page 36 Go-X Series USB3 Vision I/F ■ When [ExposureMode] is [TriggerWidth] • FrameStartTrigger On A (Frame Period) Next trigger Input enabled (Next trigger disabled) Trigger Sensor Exposure Exposure ExposureTime Active Readout GOX-2402MC-USB Period From Trigger start edge Period From Trigger end to Period From Exposure end to next PixelFormat Frame Period [A] (usec)
  • Page 37 Go-X Series USB3 Vision I/F GOX-3201MC-USB Period From Trigger start edge Period From Trigger end to Period From Exposure end to next PixelFormat Frame Period [A] (usec) to Exposure start [B] (usec) Exposure end [C] (usec) Trigger start [D] (usec) Binning Off Mono8 17857...
  • Page 38 Go-X Series USB3 Vision I/F GOX-8901MC-USB Period From Trigger start edge Period From Trigger end to Period From Exposure end to next PixelFormat Frame Period [A] (usec) to Exposure start [B] (usec) Exposure end [C] (usec) Trigger start [D] (usec) Binning Off Mono8 30770...

  • Page 39: Gain Control

    Go-X Series USB3 Vision I/F Gain Control Adjust the [AnalogAll] (master gain) setting first, and then adjust the [DigitalRed], [DigitalBlue]. Color model Digital Red Digital Blue Analog All 15dB 15dB x 126 42dB -7dB -7dB 15dB 15dB x 1.0 -7dB -7dB Monochrome model Digital All...

  • Page 40: White Balance

    Go-X Series USB3 Vision I/F White Balance To adjust the white balance automatically, set [BalanceWhiteAuto] to Once (automatic adjustment only once) or Continuous (automatic adjustment always). The metering area can be limited for automatic adjustment. To limit the metering area, specify each of the 16 areas with [AWBAreaSelector] and set [AWBAreaEnable] to True or False.

  • Page 41: Alc (Automatic Level Control) Function

    Go-X Series USB3 Vision I/F ALC (Automatic Level Control) Function The ALC (automatic level control) function combines the automatic gain control (AGC/Auto Gain Control) and automatic exposure control (ASC/Auto Shutter Control) functions, and is capable of handling various changes in brightness.The function operates as follows in response to changes in brightness.

  • Page 42: Gamma Function

    Go-X Series USB3 Vision I/F Gamma Function The gamma function corrects the output signals from the camera beforehand (reverse correction), taking into consideration the light-emitting properties of the monitor display. As the light-emitting properties of the monitor are not linear, the entire image may be darker or the gradation in the dark areas may be less noticeable when camera outputs are displayed without processing.

  • Page 43: Lut (Lookup Table)

    Go-X Series USB3 Vision I/F LUT (Lookup Table) The LUT function is used to generate a non-linear mapping between signal values captured on the sensor and those that are output from the camera. You can specify the output curve using 257 setting points (indexes). ■...

  • Page 44: Blemishcompensation

    Go-X Series USB3 Vision I/F BlemishCompensation Multiple defective pixels that are not adjacent to each other can occur on conventional CMOS sensor cameras. This camera features a function that interpolates defective pixels using the surrounding pixels. Up to 256 pixels can be corrected. Pixel interpolation can be performed via automatic detection or point-by-point manual settings.

  • Page 45: Shading Correction

    Go-X Series USB3 Vision I/F Shading Correction The ShadingCorrection function corrects non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment. Using this function allows correction even if top, bottom, left, and right shading is not symmetrical in relation to the center of the screen (H, V).

  • Page 46: Binning Function

    GOX-12401M-USB averaging processing averaging processing * In GOX-2402M-USB, 2x2 binning is processed in the image sensor. Note ・If Binning function is active, [BlemishDetect] does not work. Decimation mode Decimation mode performs 2X downsampling of the image horizontally, vertically, or both.

  • Page 47: Roi Function (Single Roi)

    (*C): GOX-2402MC-USB 1200 GOX-3200MC-USB 2048 GOX-3200MC-USB 1536 GOX-3201MC-USB 2048 GOX-3201MC-USB 1536 GOX-5102MC-USB 2448 GOX-5102MC-USB 2048 GOX-5103MC-USB 2448 GOX-5103MC-USB 2048 GOX-8901MC-USB 4096 GOX-8901MC-USB 2160 GOX-12401MC-USB 4096 GOX-12401MC-USB 3000 (*B): GOX-2402M-USB (*D): GOX-2402M-USB GOX-3200M-USB 1024 GOX-3200M-USB GOX-3201M-USB 1024 GOX-3201M-USB GOX-5102M-USB 1224 GOX-5102M-USB 1024 GOX-5103M-USB...
  • Page 48 Go-X Series USB3 Vision I/F ■ With Binning ■ Without Binning [BinningHorizontal] : 2 [BinningHorizontal] : 1 [BinningVertical] [BinningVertical] Scanning range OffsetX Width Scanning range Width OffsetX OffsetY OffsetY Height Height Width Max Width Max Note ・If ROI function is active, [BlemishDetect] does not work. —...

  • Page 49: Roi Function (Multi Roi)

    Go-X Series USB3 Vision I/F ROI Function (Multi ROI) In the Multi ROI mode, you can specify up to 64 scanning areas for a single-frame image. The areas cannot overlap. This function is supported in GOX-3200MC-USB, GOX-5102MC-USB only. The Multi ROI mode can be used only when both the Sequencer mode and the Shading mode are off.

  • Page 50: Pulse Generator

    Go-X Series USB3 Vision I/F Pulse Generator By using this function, any signal can be generated inside the camera. The following is an example of signal generation. Settings PulseGeneratorStartPoint = 2 PulseGeneratorEndPoint = 6 PulseGeneratorLength = 10 PulseGeneratorPulseWidth = 4 PulseGeneratorClearSyncMode = AsyncMode EndPoint StartPoint...

  • Page 51: Sequencer Function

    Go-X Series USB3 Vision I/F Sequencer Function The Sequencer function lets you define up to 32 index combinations of exposure time, gain, ROI, and other settings which can be stepped through each time a trigger is received.This is particularly useful for quickly capturing multiple exposures of objects under inspection to adjust for areas or components with significantly different levels of reflectance.
  • Page 52 Go-X Series USB3 Vision I/F Sample TriggerSequencer mode operation User-defined Indexes (up to 32) Triggers/ Image Frames Specify "1" in [SequencerSetStart], and start TriggerSequencer mode with index 1. Capture a 2-frame image with the first and second triggers. For the next index, configure index 3 specified in [SequencerSetNext], and capture an image with the number of frames (number of triggers) specified in [SequencerFrameNumber].

  • Page 53: Counter And Timer Control Function

    Go-X Series USB3 Vision I/F Counter And Timer Control Function This camera supports only the counter function. The counter function counts up change points in the camera’s internal signals using the camera’s internal counter, and reads that information from the host side. This function is useful for verifying error conditions via the count value using internal camera operations.
  • Page 54 Go-X Series USB3 Vision I/F ■ Internal camera blocks Counter0 Counter Event detection FrameStartTrigger At event occurrence or count up Counter1 Counter Event detection ExposureStart At event occurrence or count up Counter2 Counter Event detection SensorReadOut At event occurrence or count up Counter3 Counter Event detection...

  • Page 55: Chunk Data Function

    Refer to the technical note “Storing Data in On-Camera Flash Memory” for more information. Note JAI strongly recommends saving images to the PC or other storage location because the non-volatile flash memory may not have enough memory size to store large data.

  • Page 56: Setting List

    Go-X Series USB3 Vision I/F Setting List This camera complies with GenICam. Each setting item name conforms to GenICam SFNC (Standard Features Naming Convention). (There are some JAI-specific setting items). Each setting item is an integer type (IInteger), a real type (IFloat), an element...

  • Page 57: Feature Properties

    Feature Properties Item Setting range Default value Description a) DeviceControl Display/configure information related to the device. DeviceVendorName ー "JAI Corporation" Display the manufacturer name. DeviceModelName ー ー Display the model name. DeviceManufacturerInfo ー See the possibilities Display the manufacturer information.
  • Page 58 GOX-5102MC-USB : 96〜2448 step 16 GOX-5103MC-USB : 96〜2448 step 16 GOX-8901MC-USB : 96〜4096 step 16 GOX-12401MC-USB : 96〜4096 step 16 BinningHorizontal 2: GOX-2402M-USB : 48〜960 step 8 GOX-3200M-USB : 48〜1024 step 8 GOX-3201M-USB : 48〜1024 step 8 GOX-5102M-USB : 48〜1224 step 8 GOX-5103M-USB : 48〜1224 step 8...
  • Page 59 0:Sum Set the addition process to be used during horizontal binning. (Monochrome model only) With GOX-2402M-USB, only 0:Sum can be set during 2x2 binning. BinningHorizontal Set the number of pixels in the horizontal direction for which to perform binning.(Monochrome model only)
  • Page 60 Go-X Series USB3 Vision I/F Item Setting range Default value Description d) MultiRoiControl Configure setings for sensor Multi ROI MultiRoiMode Off, On Enable/disable Multi Roi. (This function only works in GOX-3200MC-USB and GOX-5102MC-USB) MultiRoiIndex ー ー Select the index for the Multi Roi mode. [Setting range] 0:Index1, 1:Index2, 2:Index3, 3:Index4 4:Index5, 5:Index6, 6:Index7, 7:Index8...
  • Page 61 Go-X Series USB3 Vision I/F Item Setting range Default value Description e) AcquisitionControl Configure image capture settings. AcquisitionMode 0:SingleFrame 2:Continuous Select the image capture mode. 1:MultiFrame 2:Continuous AcquisitionStart ー ー Start image capture. AcquisitionStop ー ー Stop image capture. AcquisitionFrameCount 1〜65535 In [MultiFrame] mode, set the number of frames to capture.
  • Page 62 Go-X Series USB3 Vision I/F Item Setting range Default value Description f) DigitalIOcontrol Configure settings for digital input/output. LineSelector 21:Line2 21:Line2 Select the input/output to configure. 24:Line5 60:Nand0 In1 61:Nand0 In2 62:Nand1 In1 63:Nand1 In2 255:TimestampReset LineMode 0:Input, 1:Output, ー Display the LineMode status (whether it is input, output or 2:InternalConnection internalConnection).
  • Page 63 Go-X Series USB3 Vision I/F Item Setting range Default value Description g) PulseGenerator Configure pulse generator settings. ClockPreScaler 1〜4096 Set the division value for the prescaler (12 bit) using PixelClock as the base clock. PulseGeneratorClock (MHz) 0.0181274〜74.25 0.45 Set the clock used for the pulse generator. This value is calculated using the [ClockPreScaler] value as a base.
  • Page 64 Go-X Series USB3 Vision I/F Item Setting range Default value Description h) AnalogControl Configure analog control settings. GainSelector 0:AnalogAll Select the gain to configure. AnalogAll, 1:DigitalRed, (DigitalRed and DigitalBlue are color model only) 2:DigitalBlue Gain AnalogAll, x1.0 Set the gain value for the gain setting selected in [GainSelector]. AnalogAll x1.0 〜...
  • Page 65 Allows confirmation of the AGC, ASC, and AWB convergence status. [Status] 1:ExecutingASC, 2:ExecutingAGC, 3:ExecutingASCandAGC, 4:ExecutingAWB 5:ExecutingASCandAWB, 6:ExecutingAGCandAWB, 7:ExecutingASCandAGCandAWB, 8:Convergent, 9:ConditionError, 255:Idle k) ImagingControl Configure settings for other JAI functions. VideoProcessBypassMode Off, On Enable/disable VideoProcessBypass mode. l) ShadingConrol Configure shading correction settings.
  • Page 66 Go-X Series USB3 Vision I/F 項⽬ 設定範囲 初期値 説明 m) BlemishControl Configure blemish compensation settings. BlemishEnable True, False True Enable/disable blemish correction. BlemishDetect ー ー Execute blemish detection. This command can not be executed under the following conditions. ・When no image is output ・Outputting TestPattern ・In Sequencer mode ・In Overlap MultiRoi mode...
  • Page 67 Go-X Series USB3 Vision I/F Item Setting range Default value Description o) CounterAndTimerControl Configure counter settings. (This camera only supports counter functions.) CounterSelector 0:Counter0, 1:Counter1, ー Select the counter. 2:Counter2, 3:Counter3 CounterEventSource ー Assign the counter event signal for which you want to read the count value to a dedicated counter, and read the value.

  • Page 68: Miscellaneous

    Go-X Series USB3 Vision I/F Miscellaneous Troubleshooting Check the following before requesting help. If the problem persists, contact your local JAI distributor. ■ Power supply and connections The POWER/TRIG LED remains lit amber and Camera initialization may not be complete due does not turn green, even after power is to lack of a power.

  • Page 69: Specifications

    Monochrome CMOS Bayer color CMOS >60dB@10bit >60 dB@10bit (Gch) GOX-2402M-USB AnalogGainAll:x1.0,Shutter:OFF, Mono10, Frame Rate 130.20 fps GOX-2402C-USB AnalogGainAll:x1.0,Shutter:OFF, Bayer10, Frame Rate 130.20 fps GOX-3200M-USB AnalogGainAll:x1.0,Shutter:OFF, Mono10, Frame Rate 95.36 fps GOX-3200C-USB AnalogGainAll:x1.0,Shutter:OFF, Bayer10, Frame Rate 95.36 fps GOX-3201M-USB AnalogGainAll:x1.0,Shutter:OFF, Mono10, Frame Rate 55.90 fps GOX-3201C-USB AnalogGainAll:x1.0,Shutter:OFF, Bayer10, Frame Rate 55.90 fps...
  • Page 70 Go-X Series USB3 Vision I/F Mono8 BayerRG8 GOX-2402M-USB: 162 fps GOX-2402M-USB: 162 fps GOX-3200M-USB: 119 fps GOX-3200M-USB: 119 fps GOX-3201M-USB: 55 fps GOX-3201M-USB: 55 fps 8bit GOX-5102M-USB: 74 fps GOX-5102M-USB: 74 fps GOX-5103M-USB: 35 fps GOX-5103M-USB: 35 fps GOX-8901M-USB: 32 fps...
  • Page 71 GOX-3200MC-USB : 2048 GOX-3201MC-USB : 2048 GOX-5102MC-USB : 2448 GOX-5103MC-USB : 2448 GOX-8901MC-USB : 4096 GOX-12401MC-USB : 4096 Binning (H) GOX-2402M-USB : 960 GOX-3200M-USB : 1024 GOX-3201M-USB : 1024 GOX-5102M-USB : 1224 GOX-5103M-USB : 1224 GOX-8901M-USB : 2048 GOX-12401M-USB : 2048...
  • Page 72 Go-X Series USB3 Vision I/F Default level 8LSB@8bit DigitalAll : -133 ~ +255 LSB @12bit Black Level Video level adjustment range DigitalRed : -64 ~ +64 LSB @12bit adjustment DigitalBlue : -64 ~ +64 LSB @12bit Resolution adjustment 1LSB@12bit AnalogAll : 0dB 〜 42dB Gain Manual adjustment range DigitalRed : -7dB 〜...

  • Page 73: Spectral Response (Gox-2402Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-2402MC-USB) — 73 —...

  • Page 74: Spectral Response (Gox-3200Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-3200MC-USB) — 74 —...

  • Page 75: Spectral Response (Gox-3201Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-3201MC-USB) — 75 —...

  • Page 76: Spectral Response (Gox-5102Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-5102MC-USB) — 76 —...

  • Page 77: Spectral Response (Gox-5103Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-5103MC-USB) — 77 —...

  • Page 78: Spectral Response (Gox-8901Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-8901MC-USB) — 78 —...

  • Page 79: Spectral Response (Gox-12401Mc-Usb)

    Go-X Series USB3 Vision I/F Spectral Response (GOX-12401MC-USB) — 79 —...

  • Page 80: Dimensions

    Go-X Series USB3 Vision I/F Dimensions Dimenstional tolerance: ± 0.3mm Unit: mm — 80 —...

  • Page 81: Comparison Of The Decibel Display And Multiplier Display

    Go-X Series USB3 Vision I/F Comparison of the Decibel Display and Multiplier Display Decibels[db] Multipliers[x] Remarks 0.501 0.562 0.631 0.708 0.794 0.891 1.122 1.259 1.413 1.585 1.778 1.995 2.239 2.512 2.818 3.162 3.548 3.981 4.467 5.012 5.623 6.31 7.079 7.943 8.913 11.22 12.589...

  • Page 82: User's Record

    Model name: …………… Revision: …………… Serial No: …………… Firmware version: …………… For camera revision history, please contact your local JAI distributor. Trademarks • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.

  • Page 83: Index

    Go-X Series USB3 Vision I/F Index 6-pin round Lens Lens mount Acquisition Lookup Table Adjusting the Black Level Adjusting the Gain Parts Identification Pixel format Binning Function POWER/TRIG LED Blemish Compensation Camera locking screw holes Connecting Devices Counter And Timer Control Saving the Settings Sequencer Function Setting List...

  • Page 84: Revision History

    Go-X Series USB3 Vision I/F Revision history Revision Date Changes Updated China RoHS. Corrected the external input/output circuit June 2022 diagrams. Oct. 2021 Added the Non-Volatile Flash Memory topic. July 2021 First Release. — 84 —...

This manual is also suitable for:

Gox-2402c-usbGox-3200m-usbGox-3200c-usbGox-3201m-usbGox-3201c-usbGox-5102m-usb ... Show all

Table of Contents