Configuring Exposure And External Trigger Settings - JAI GO-2400M-PMCL User Manual

Configuring Exposure and External Trigger Settings

Configure settings related to exposure control methods and trigger control.
The factory default settings are as follows. Change settings as necessary, according to the intended
purpose or application.
Factory default values
Trigger Selector (trigger operation)
Trigger Mode
Trigger Source (trigger signal source)
Trigger Activation (trigger polarity)
Exposure Mode
Exposure Time
Exposure Auto *
* This item is only enabled when [Exposure Mode] is set to [Timed].
Caution
When [Exposure Mode] is set to [Off], [Trigger Mode] cannot be set to [On]. Other settings may also be restricted
depending on the [Exposure Mode] setting, so be sure to set the [Exposure Mode] setting before configuring the
trigger settings.
Expand [Acquisition Control] and configure the following items.
Caution
Settings can only be configured when image capture on the camera is stopped. If an item is grayed out and the
setting cannot be changed, stop image capture beforehand.
Item
̶ 18 ̶
Default value
Frame Start
Off
Line7 CC1
Rising Edge (rising edge of input signal)
Timed (control via exposure time)
20363 (µs)
Off
GO-2400M-PMCL / GO-2400C-PMCL