Table of Contents
Advertisement
VERSION 09/2016
OPERATING MANUAL
7.3.5
CHANGING FROM AIR ROUND JET TO AIR FLAT JET
Defective electrode!
Material damage due to functional faults.
Do not damage the electrode.
Flush spray gun:
1. Switch off high voltage at the control unit.
2. Turn compressed air regulator for shaping and
atomizing air on the EPG 5000 to "0".
3. Close the compressed air supply on the
material side upon the product pressure
generator.
4. Relieve the pressure of gun and system, e.g., by
switching on gun without high voltage.
5. Fill fl ushing agent and adjust pressure.
6. Thoroughly fl ush out the spray gun.
7. Relieve the pressure on the gun and the system.
Dismount the nozzle
Flat jet
1. Unscrew the union nut (1) by hand.
2. Remove AF 5000 air cap (4).
3. Unscrew and remove AF 5000 fl at jet nozzle (5) by hand.
4. Clean the spray gun front carefully with damp cloth. Pay attention to the electrode (11).
Use protective cap (12).
AR 5000 – round jet
1. Unscrew the union nut (1) by hand.
2. Remove AR 5000 air cap (2). Unscrew AR 5000 nozzle (3) by hand and remove it.
3. Clean the spray gun front carefully with damp cloth. Pay attention to the electrode (11).
Use protective cap (12).
EARV 5000 – round jet
1. Unscrew the EARV union nut (7) by hand.
2. Unscrew and remove EARV nozzle (8) by hand.
3. Unscrew nozzle insert (9) from nozzle (8) using air nozzle spanner (10).
4. Clean the spray gun front carefully with damp cloth. Pay attention to the electrode (11).
Use protective cap (12).
ORDER NUMBER DOC2360924
NOTICE
AR 5000
2
3
1
6
1
4
5
11
12
GA 5000EA
EARV 5000
9
7
8
10
B_05752
56
Advertisement
Table of Contents
