VERSION 09/2016
OPERATING MANUAL
6
ASSEMBLY AND COMMISSIONING
6.1
TRAINING ASSEMBLY/COMMISSIONING STAFF
Incorrect installation/operation!
Risk of injury and damage to the device.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
6.2
STORAGE CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms.
The air temperature at the storage location must be between -20 °C and +60 °C (-4 °F and +140 °F).
The relative air humidity at the storage location must be between 10 and 95% (without
condensation).
6.3
INSTALLATION CONDITIONS
The air temperature at the installation site must be in a range between 0 °C and 40 °C; 32 °F
and 132 °F.
The relative air humidity at the installation site must be between 10 and 95% (without
condensation).
6.4
TRANSPORTATION
Protect valve needle with protection cap (Order No. 2315709).
ORDER NUMBER DOC2360924
WARNING
The assembly and commissioning staff must have the technical
skills to safely commission the device.
When assembling, commissioning and carrying out all work,
read and follow the operating manuals and safety regulations
for the additionally required system components.
GA 5000EA
37