WAGNER GA 5000EAIC Translation Of The Original Operating Manual page 57

VERSION 09/2016
OPERATING MANUAL
Mount nozzle
Flat jet
1. Screw in and tighten AF 5000 fl at jet nozzle (5) by hand.
2. Put the AF 5000 air cap (4) in place. Screw the union nut (1) onto the spray gun body.
3. Set the desired fl at jet level with the air cap horns (6) and then tighten the union nut
by hand.
AR 5000 – round jet
1. Screw on and tighten AR 5000 nozzle (3) by hand.
2. Position AR 5000 air cap (2). Screw the union nut (1) onto the spray gun body and
tighten by hand.
EARV 5000 – round jet
1. Screw on EARV nozzle insert (9) into nozzle (8) using air nozzle spanner (10). Nozzle
insert and nozzle body must be fl ush, subsequently do not continue turning and
slightly tighten.
2. Screw on and tighten EARV nozzle (8) by hand.
3. Select EARV union nut (7) depending on the viscosity: HV or LV. Screw the union nut
onto the spray gun body and turn fully backwards by hand in order to reach a large
spray jet diameter. Unscrew the nozzle nut no more than 90° in order to reach a small
spray jet diameter.
ORDER NUMBER DOC2360924
GA 5000EA
57