EDITION 12/2008
OPERATING MANUAL
5.4.4
CHANGING FROM ROUND JET NOZZLE TO FLAT JET NOZZLE
Perform steps 1 and 7 of paragraph 5.4.3
8. Place fl at jet nozzle (E) into air cap (F).
Place booth of them onto the sleeve
(G)
9. Screw nozzle nut (H) on the gun body
(K). Adjust desired jet level by means of
air cap horns (L). Tighten air cap nut (F)
by hand on the gun body (K)
5.4.5
FITTING OR CHANGING FLAT JET NOZZLE
Perform steps 1 and 5 of paragraph 5.4.3
6. Unscrew nozzle nut (H) by hand.
7. Remove air cap (F) and fl at jet nozzle (E)
8. Mounting:
According to steps 8 and 9 of paragraph 5.4.4
PART NO. DOC350731
Round jet nozzle
Flat jet nozzle
GA 2800EA, GA 2805EA
29