VERSION 09/2016
OPERATING MANUAL
5.6.2
SPRAYING PROCEDURE FOR FLAT JET AIR ATOMIZING
In this process, the spray product is fed to the nozzle at a pressure of 0.05–0.2 MPa; 0.5–2 bar;
7–29 psi. The atomizing air at approx. 0.25 - 0.4 MPa; 2.5 - 4 bar; 36 - 58 psi produces a soft
round jet, which largely eliminates the problem of overlapping boundaries. The shaping
air allows modifi cation of the spray jet. There are various nozzles and air caps available as
accessories for the respective spray product and the discharge quantities.
Shaping air
Spray product
Atomizing air
Advantages
- Large range of adjustment of the spray jet
- Thin layers
- Uniform coating thickness
- Perfect fi nish
ORDER NUMBER DOC2360924
B_00180
GA 5000EA
Air cap
Spray pattern
Spray angle
31