WAGNER GA 5000EAIC Translation Of The Original Operating Manual page 78

VERSION 09/2016
OPERATING MANUAL
3
Ensure the correct
insertion position!
Clean and degrease the inside of the adapter
and the outside of the cascade, then grease
the cascade surface with Vaseline.
4
ORDER NUMBER DOC2360924
Valve needle assembly tool,
Order No. 2309368
3
1. Move the valve rod to the rear position so that the sealing area
does not become scratched (1).
2. Very slightly tighten valve tip (2) using an assembly tool with three
fi ngers.
3. Use socket or ring spanner (no open-end wrench) to tighten the
valve housing (3).
4. Slide the valve rod to the forward position (at the valve seat) (4).
2
B_06001
GA 5000EA
2
0.1 Nm
0.07 lb ft
SW11
1.8 Nm;
1.33 lb ft
4
SW3
0.8 Nm; 0.6 lb ft
(1)
(4)
B_04373
78