Changing The Valve Housing - WAGNER GA 5000EAIC Translation Of The Original Operating Manual

VERSION 09/2016
OPERATING MANUAL
7.3.6

CHANGING THE VALVE HOUSING

Relieve pressure prior changing the valve housing.
Use a socket or ring spanner
(not an open-end wrench) to
tighten the valve housing.
Valve housing and valve tip are available in various materials:
Standard version
Special accessories
When wear-related problems occur, the valve housing and/or valve tip can be exchanged
Order No., see Chapter 13.
ORDER NUMBER DOC2360924
Chapter 7.3.3
SW11
;
1.32 lb ft
Valve housing
Material of the valve seat
Steel
PEEK
GA 5000EA
B_05753
Valve tip
Product
PEEK
Steel
58