VERSION 09/2016
OPERATING MANUAL
10.3
DISMANTLING OF THE GUN
Plastic parts
Gently handle all plastic parts.
10.3.1
TOOLS
For disassembling and assembling the spray gun, the following tools are required:
- Allen wrench, SW 2.5
- Allen wrench, SW 3
- Allen wrench, SW 5
- Open-end wrench, SW 5
- Open-end wrench, SW 7
- Open-end wrench, SW 8
- Open-end wrench, SW 11
- Open-end wrench, SW 19
- Ring spanner, SW11
- Slide gauge
- Valve needle assembly tool, Order No. 2309368
- Clamping screw assembly tool, Order No. 2325263
Brand notice:
The brands specifi ed in this document are property of the respective owners. Loctite , for
example, is a registered brand of Henkel.
ORDER NUMBER DOC2360924
GA 5000EA
69