Adjusting Screw - WAGNER GA 5000EAIC Translation Of The Original Operating Manual

VERSION 09/2016
OPERATING MANUAL
5.7.3

ADJUSTING SCREW

By turning the rear adjusting screw of the gun, the outlet cross-section can be adjusted
on the product valve. This cross-section is maximized by turning the screw leftwards,
by turning the screw rightwards the cross-section is minimized. With the same pressure
settings, turning to the right results in a reduction of the fl ow rate and fi ner atomization.
Note: The spray pattern is changed with this setting.
After adjusting fi x the screw (A) by tightening the nut (B) again.
A
+ -
ORDER NUMBER DOC2360924
B_05756
Turn to the left:
Stop to back
Larger cross-section
Turn to the right:
Stop to front
Smaller cross-section
GA 5000EA
B A
35