Key Operation; Span/Trace/Posion - GRAPHTEC midi LOGGER GL220 User Manual

3.2

Key Operation

This section describes key operation.
(2) TIME/DIV
(4) QUIT
(11) CURSOR
(ALARM CLEAR)
(12) FILE

(1) SPAN/TRACE/POSION

(1) SPAN/TRACE/POSITION
(10) DISPLAY
(9) REVIEW
Switches the display in the digital display.
Used to change the settings related to waveform display during Free Running (when stopped),
data capture and data replay.
Pressing this key will switch displays as shown below.
MONITOR
Displays digital values
(default status)
* When ALL is set, setting values for CH1 is reflected on other channels.
When CH1 is OFF, ALL Cannot be set.
(3) MENU
(5) Direction Keys
(6) ENTER
(7) FAST FORWARD key (KEY LOCK)
(8) START/STOP (USB DRIVE)
SPAN
Allows changing of the span value Allows changing of the position
(waveform amplitude) (waveform up/down position)
▪ Channel change ▪ Range can be changed in units of 10%
: keys
▪ Amplitude change : ▪ Channel change
keys
▪ Position change
▪ Change available : Voltage 8 steps
/Temperature 6 steps
▪ Change available : 10% steps of range
CHAPTER 3 Settings and Measurement
POSITION TRACE
Allows turning ON/OFF of the
waveform display
▪ Channel change :
▪ Position change :
: keys
▪ Change available : ON/OFF
: keys
* Data is captured even if OFF is set.
keys
keys
3−7