CHAPTER 3 Settings and Measurement
(2) TIME/DIV
(3) MENU
(4) QUIT (LOCAL)
(5) Direction keys
(6) ENTER
3−8
Press the left/right key of the TIME/DIV key to change the time axis display width.
Open the settings window to capture data. For details on settings, see "3.4 Setting
Menus" on page 3-16.
This key is primarily used for the following operations.
• To cancel a setting during menu configuration.
• To return to the MONITOR window when the SPAN/TRACE/POSITION window is displayed.
• To cancel remote status (in which keys are disabled) through interface control.
• To close the menu screen.
• To quit data replay.
This key is primarily used for the following operations.
• To move a menu or setting item during menu configuration.
• To move the cursor during replay.
• To move the active channel in the Waveform + Digital and Digital + Calculation Display
screens (
keys).
• To change the setting of SPAN/TRACE/POSITION (
• To change the Quick setting (
• To change the channel to be displayed in the Digital + Calculation Display screen (
This key is primarily used for the following operations.
• To finalize setting items during menu configuration or open submenus.
keys).
keys).
keys).