Operation Modes; Free Running - GRAPHTEC midi LOGGER GL220 User Manual

3.3

Operation Modes

You can check the system operation status in the simplified message display.
operation

Free Running

Capturing
Dual View Replaying The current waveform display and data on
Replaying
Operation status transition
[REVIEW] key
(1) Free Running
When in Free Running status, you primarily set up the system to capture data.
You can check the current input signal as a waveform or digital values.
Operations available during Free Running
Measuement parameters settings
SPAN/TRACE/POSITION
Display mode
File operations
Data replay
Time axis change
operation
Start up status or data is not being captured
Data is being captured in the main memory
or USB memory.
capturing is being replayed
Captured data is being replayed
[START/STOP] key
Capturing
[START/STOP] key
[QUIT] key
Dual View Replaying
[REVIEW] key
Free Running
[QUIT] key
The MENU key is used to change various setting items in configuration
menus.
The SPAN/TRACE/POSITION key is used to change settings.
The DISPLAY key is used to change the display mode.
The FILE key is used to perform file-related operations.
The REVIEW key is used to replay captured data.
The TIME/DIV key is used to change the time axis.
CHAPTER 3 Settings and Measurement
simplified message display
Free Running
Memory Recording
USB Memory Recording
Memory Recording
USB Memory Recording
Memory Review
USB Memory Review
Replaying
3−13