Table of Contents
Advertisement
Maintenance
UPS Firmware Upgrade
This procedure is intended for the firmware upgrade of the 9PXM UPS model. Please follow these steps
carefully to ensure complete success of the firmware upgrade on this model UPS. The firmware can be
upgraded via RS232 connection or USB connection. If a USB connection is used, Option 2 from the Main menu,
will be a required step in this process. The process requires a file download to your laptop/PC then installation
of the firmware to the UPS.
Prerequisites
The following is required for the firmware download to your computer:
Windows Operating System
l
7 zip application installed
l
Administrative permissions
l
Do not use PCs with UPS protection software installed (ie. IPM or IPP)
l
Unpacking the Downloaded Zip File
1.
Download the upgrade tool from the Eaton website. The file will look similar like the following:
SetUPS-9PXM-Toolv1_2.7z
2.
Double-Click on the file and extract the contents into a single newly created folder:
Figure 67. Extract Zip File to Unzip Folder
The name of the new folder is of the user's discretion. It is recommended to create a folder off the
root of the hard drive for ease of access.
9-76
Eaton 9PXM UPS (4-20 kVA) User's Guide
P-164000669—Rev 05
Advertisement
Table of Contents
