Table of Contents
Advertisement
Figure 76. Communication Types
5. The application will evaluate the firmware package and display that it was located and loaded into memory.
It will also display the size and the channel# in which the firmware will be uploaded.
Figure 77. Firmware
6. The application will then set the UPS into Bootloader mode. If this is completed successfully, the current
firmware is erased in preparation for the new firmware to be uploaded. At this point, the application will
begin to upload the new firmware.
Eaton 9PXM UPS (4-20 kVA) User's Guide
Maintenance
P-164000669—Rev 05
81
Advertisement
Table of Contents
