Table of Contents
Advertisement
UPM or EBM/SuperCharger Firmware Upgrade
1.
Choose Option 4 from the Main menu and confirm for UPM firmware upgrade:
Figure 80. UPM - EBM/Supercharger Firmware Menu
2.
Wait for the program to begin
3.
Enter the communication port to be used for the upgrade. This can be viewed in the device manager of
the operating system, (See Figure 73 on page 79).
a.
Verify the physical connection from the PC to the UPS or EBM device
b.
RS232 (usually COM1)
c.
USB to RS232 (assigned COM port)
d.
USB (assigned Virtual COM port)
Figure 81. Firmware Comm Port Selection
4.
Press the Enter key to begin.
5. The following screen will appear:
Eaton 9PXM UPS (4-20 kVA) User's Guide
Maintenance
P-164000669—Rev 05
83
Advertisement
Table of Contents
