Table of Contents
Advertisement
UPS Rack Rails
(Front)
Figure 11. Rack Tray Location
3.
Remove the cabinet from the caster cart as follows (see Figure 12):
a.
Lower the leveling feet to stabilize the caster cart.
b.
Remove the rear bracket and screws.
c.
Using two people, slide the cabinet backwards to disengage it from the slot tabs.
d.
Lift the cabinet off of the caster cart.
UPS Rack Rails
Rail Backs
Rail Tray
Eaton 9PXM UPS (4-20 kVA) User's Guide
Installation Setup
Screw
Washer
P-164000669—Rev 05
13
Advertisement
Table of Contents
