Mpeg Transport Stream Recording Procedure - Planar IT-100 Operating Manual

Video and audio parameters are indicated in the right part of the table. To view the
picture in full screen mode, press the «F1 / Zoom» key. To go back to the current mode,
press «EXIT» key.
To adjust the volume of the sound, press the «◄» or «►» key.

4.8. MPEG Transport Stream Recording Procedure

This mode enables the real-time MPEG transport stream data recording in the
Analyzer internal memory. The mode becomes available upon pressing the F3 / Mode key
and selecting MPEG Recorder in the dropdown menu from the following modes:
1) Channel mode, for terrestrial TV channels (section 4.3.3);
2) Channel mode, for satellite TV channels (section 4.4.3);
3) MER/BER mode, for satellite TV channels (section 4.4.4);
4) IPTV mode, for the IPTV stream (section 4.5.2).
The mode is available only in case the synchronization with the MPEG transport
stream source is achieved.
The mode screen view is shown in figure 4.65.
The table includes the following information:
1) File. The name of file for stream recording.
2) Status. The current mode status: recording – the recording is in progress,
stopped – the recording is stopped.
3) Duration. The time of recording.
4) File Size. The current size of the recorded file.
Figure 4.64
Figure 4.65
83