Table of Contents
Advertisement
The
icon in the main menu corresponds to this mode. This mode allows
performing all operations with the satellite parameters. The screen view is shown in
figure 4.40.
The table indicates satellite name and its orbital position. Use the functional keys to
perform the following operations with satellites:
− «F1 / Edit».
− «F2 / New».
− «F3 / Delete».
− «F4 / Rename». Renaming the satellite in cursor position.
− «F5 / Drive».
flash drive.
− «F6 / Sort».
position.
Enter orbital position with alphanumeric keyboard to find a corresponding satellite in
the list.
4.4.11.2. Satellite Entry Creating and Editing
The screen view of this mode is shown in figure 4.41.
The satellite entry includes five parameters:
1) Name.
2) Orbital position.
eastern (E) or western (W) longitude.
Figure 4.40
Reading and editing the satellite in cursor position.
Creating a new satellite.
Deleting the satellite in cursor position.
Satellites source drive selecting: internal drive or USB
Selecting the satellites sorting order: by name or by orbital
Figure 4.41
Satellite name.
Satellite orbital position, in degrees from 0 to 180 of
55
Advertisement
Table of Contents
