Identification Data Readout - Planar IT-100 Operating Manual

The table includes the following parameters to be edited:
1) Color theme.
2) Key sound.
3) Volume.
4) Date.
5) Time.
6) Auto power off.
7) Quick start.
To select a parameter, use the « » and « » keys. To modify a parameter, use the
«◄» and «►» keys.
The Auto power off parameter allows to automatically switch the Analyzer off when
no keys are pressed during a selected time interval.
The Quick start parameter allows selecting the Analyzer switching on method. If the
parameter is set to off, the Analyzer switches on in the Main menu mode. If the parameter
is set to on, the last used before switching the Analyzer off measurement mode is opened
after switching the Analyzer on.

4.10.4. Identification Data Readout

The identification data readout program is used for indication of the Analyzer serial
number and modification, firmware version, network addresses and names. It also displays
the checksum of metrologically significant part of the firmware. The mode allows updating
the Analyzer firmware. The
screen view is shown in figure 4.70:
Figure 4.69
Selection of a color set of graphical interface elements.
Selection of key pressing sound or disabling key pressing
sound.
Adjustment of audio volume.
Setting the date.
Setting the time.
Setting auto analyzer power off mode.
Setting the Analyzer starting mode.
icon in the main menu corresponds to this mode. The
Figure 4.70
88