Table of Contents
Advertisement
5) Drive. The drive for stream recording. The transport stream can be recorded only
to the Analyzer internal memory.
6) Free Space. Free space on the drive for recording. In case the drive is not
6
available
, Not available is displayed.
To set up the recording time, press the F1 / Settings key and select one of the
Duration values in the dropdown menu: 15 sec, 30 sec, 45 sec, 45 sec, 1 min, 3 min, 5
min. To be able to control the recording time manually, select the indef value.
To start the recording, press the F6 / Start key. The information on the transport
stream being recorded is updated in the real-time mode during recording.
To stop the recording, press the F6 / Stop key. The recoding can also be
automatically stopped by the Analyzer in the following cases:
1) The time of recording has achieved the preset duration;
2) The synchronization with the MPEG transport stream is lost;
3) No enough of free drive space;
4) The transport stream rate exceeds the file recording speed.
In case the recording is automatically stopped by the Analyzer, you will hear the beep
sound and see the message stating the reason of recording stop on the screen.
By pressing the F5 / i key the message will be displayed stating that the transport
stream can only be recorded in the Analyzer internal memory.
You can play or perform MPEG analysis of recorded transport stream files with File
Manager (section 4.9).
4.9. File Manager
4.9.1. General information
File manager is intended for controlling files on the Analyzer internal drive, as well as
on the USB flash drive, connected to the Analyzer. The file manager allows viewing,
deleting, copying and moving files, and well as drive formatting.
The file manager is accessed from any selected tab in the main selection menu. Use
the
and
keys to set the
corresponding functional key. To return to the selection menu, use the EXIT key.
4.9.2. Operating File Manager
The file manager screen view is presented in fig. 4.66.
6
The internal drive is not available if the Analyzer is connected to the PC via USB.
icon in the bottom line of screen and select the
84
Advertisement
Table of Contents
