Table of Contents
Advertisement
Defect detection: the Analyzer drive is not available when connected to PC, or OS
requesting for USB driver.
Possible reason:
terrestrial or satellite settings menu.
Methods of correction:
(section 4.3.2, 4.4.2).
Store your IT-100 Analyzer under the following conditions: environment temperature
0
from -20 to +40 С, relative humidity up to 90 % (at 30 С).
The IT-100 Analyzer must be shipped in any closed vehicle at temperature from -20
0
to +40
С, relative humidity 90% (at 30
(630 to 800 mm Hg).
Cargo holds, railway cars, containers, and truck beds, utilized for shipment of the
Analyzer should be free from any traces of cement, coal, chemicals, etc. When shipped by
air the products should be kept in aircraft sealed compartments.
The serial numbers of Analyzer, which contain index number and date-of-
manufacture code, can be found on the bottom panel of the respective item and also can
be viewed on the display in identification data readout program (section 4.10.4).
The manufacturer warrants the IT-100 Multisystem TV Analyzer to conform to the
specifications of this Manual when used in accordance with the regulations detailed in this
Manual.
The manufacturer will repair or replace without charge, at its option, any IT-100
Multisystem TV Analyzer found defective in manufacture within the warranty period, which
is twelve (12) months from the date of purchase. Should the user fail to submit the
warranty card appropriately certified by the seller with its stamp and date of purchase the
warranty period will be determined by the date of manufacture.
The warranty is considered void if:
1) the defect or damage is caused by improper storage, misuse, neglect, inadequate
maintenance, or accident;
2) the product is tampered with, modified or repaired by an unauthorized party;
3) the product's seals are tampered with;
4) the product has mechanical damage.
The battery is not included or covered by this warranty.
Transport risks and costs to and from the manufacturer or the authorized service
centers are sustained by the buyer.
The manufacturer is not liable for direct or indirect damage of any kind to people or
goods caused by the use of the product and/or suspension of use due to eventual repairs.
When returning the faulty product please include the accurate details of this product
and clear description of the fault. The manufacturer reserves the right to check the product
in its laboratories to verify the foundation of the claim.
Measurement results output via USB interface is enabled in
Disable measurement results output via USB interface
7. STORAGE
8. TRANSPORTATION
0
С) and atmospheric pressure of 84 to 106.7 kPa
9. LABELING
10. WARRANTY INFORMATION
98
0
Advertisement
Table of Contents
